The Netherlands
Weeresteinstraat 138
2181 GD Hillegom
Sitemap
Pages in menu
- Home
- Products
- Overhead conveyor
- Assembled chain
- Galv. chain with trolleys | OC.20.520
- Galv. chain with click trolleys | OC.12.520
- Galv. chain with trolleys | OC.40.522
- Galv. chain with trolleys | OC.10.520
- Galv. chain with wide trolleys | OC.12.560
- S.S. chain with S.S. trolleys | OC.40.521SB
- Galv. chain with click trolleys | OC.24.520
- Galv. chain with MX trolleys | OC.20.565
- Galv. chain with click trolleys | OC.36.520
- Galv. chain with MX / shortened trolleys | OC.20.560
- S.S. chain with S.S. trolleys | OC.40.520S
- Galv. chain with click MX trolleys | OC.24.565
- Galv. chain with S.S. trolleys | OC.40.521B
- Galv. chain with S.S. trolleys | OC.40.520B
- Galv. chain with trolleys | OC.16.520
- 10x38mm chain for turkey | OC.15.520
- Galv. chain with Alu trolleys | OC.25.520
- Galv. chain with trolleys | OC.80.520
- Galv. chain 8x38mm with trolleys | OC.60.520
- Galv. chain with S.S. trolleys | OC.40.520
- Galv. chain with MX trolleys 4" | OC.20.575
- Galv. chain with click trolleys | OC.35.520
- Galv. Nutech chain | OC.20.570
- Trolleys
- Trolley half, for T-track | OC.20.508
- Trolley half "click" for T-track | OC.12.503
- Trolley half for tube track | OC.40.523
- Trolley half for T-track | OC.10.503
- Wheel for trolley D=51,3mm | OC.20.505
- Trolley half "wide" for T-track | OC.12.506
- S.S. Trolley half for tube track | OC.40.507B
- Trolley half for turkey | OC.15.503
- Wheel for trolley D=49mm | OC.10.504
- S.S. Trolley half for T-track| OC.14.518
- Trolley half "click" for tube track| OC.35.503
- Cast iron half for tube track | OC.45.508
- Trolley half "click" for T-track | OC.24.508
- Trolley half MX for T-track | OC.20.509
- Alu trolley half for T-track | OC.20.503
- Shortened trolley half for T-track | OC.20.511
- Wide trolley wheel | OC.40.509
- Trolley half "click" MX for T-track | OC.24.509
- Shortened click trolley half | OC.24.511
- Complete trolley set | OC.10.502
- Complete trolley set | OC.20.501
- Trolley set for tube track | OC.16.502
- Trolley half for tube track | OC.16.503
- Trolley half "click" for tube track | OC.36.503
- Trolley bracket for tube track | OC.40.025
- Trolley bracket for T-track | OC.20.005
- Trolley set for tube track | OC.40.524
- S.S. bracket for tube track | OC.30.005
- Trolley set MX version | OC.20.513
- Cast iron trolley for tube track | OC.45.501
- Trolley bracket for T-track | OC.10.001
- Wheel for trolley D=49mm | OC.50.505
- Trolley set click version | OC.12.502
- S.S. trolley set for tube track | OC.40.511B
- Trolley set click version | OC.24.501
- Wheel for click trolley D=49mm | OC.12.504
- Click trolley bracket for T-track | OC.12.001
- Heavy duty trolley half | OC.95.503
- S.S. trolley set for T-track | OC.40.528B
- Trolley set wide click version | OC.12.508
- Alu trolley bracket for chain | OC.20.001
- Wide click trolley bracket | OC.12.002
- S.S. trolley bracket for T-track | OC.40.086
- Cast iron bracket for tube track | OC.30.002R
- Blue wheel for trolley D=49mm | OC.10.528
- S.S. trolley half for T-track | OC.40.518B
- Complete S.S. trolley set | OC.14.528
- Trolley half for 8x38mm T-track | OC.60.508
- Wheel for click trolley D=51,3mm | OC.24.505
- Wheel for click trolley | OC.36.509
- Click bracket MX for T-track | OC.24.033
- Alu heavy duty trolley half | OC.95.501
- Trolley wheel D=51 transfer system | OC.20.555
- Trolley set "click" for tube track | OC.36.502
- Trolley bracket for T-track | OC.60.005
- Shortened bracket for T-track | OC.20.034
- Trolley bracket MX for T-track | OC.20.033
- Heavy duty trolley wheel D=50mm | OC.95.505
- Trolley set "click" for tube track | OC.35.502
- Trolley bracket for tube track | OC.16.001
- Blue trolley half for T-track | OC.80.501
- Shortened complete trolley set | OC.20.512
- Heavy duty trolley half | OC.95.508
- Insert for S.S. trolley | OC.10.088
- S.S. trolley half for T-track | OC.40.518
- Complete blue trolley set | OC.80.502
- Click trolley bracket for T-track | OC.24.005
- S.S. trolley set for T-track | OC.40.528
- Wheel for trolley D=51,3mm | OC.20.505R
- Alu trolley bracket for cable | OC.20.011
- Wheel for trolley D=49mm | OC.50.504R
- Alu trolley half for cable | OC.20.507
- Complete Alu trolley set for cable | OC.20.506
- Click bracket for tube track | OC.35.005
- Wheel for trolley D=49mm | OC.50.504
- Trolley half, for T-track | OC.20.508R
- Trolley half "click" for T-track | OC.12.503R
- Shortened click bracket for T-track | OC.24.034
- Blue trolley bracket for T-track | OC.80.001
- S.S. heavy duty trolley half | OC.95.502
- Alu cable connector bracket | OC.20.060
- Trolley set MX click version | OC.24.513
- Trolley half "click" for T-track | OC.12.503B
- Complete Alu trolley set for chain | OC.20.502
- Complete Alu cable connector | OC.20.504
- Wheel for trolley D=51,3mm | OC.20.505M
- Wheel for click trolley D=49mm | OC.12.504R
- Wheel for trolley D=51,3mm | OC.20.505G
- Wheel for trolley D=49mm | OC.10.504G
- Wide trolley wheel | OC.40.509Y
- Wide trolley wheel | OC.40.509Z
- Wide trolley wheel | OC.40.509GY
- Chain
- Galv. overhead chain 8x25,4mm | OC.00.100
- S.S. overhead chain 8×25,4mm | OC.00.102
- Connection link 8x25,4mm | OC.00.101
- S.S. connecting chain 4x40mm | OC.10.040
- Overhead chain 10x38mm | OC.00.105
- Connection link 10x38mm | OC.00.106
- Overhead chain 8x38mm | OC.00.107EG
- Cable d=8 D=10mm shielded (Rilsan) | OC.20.030A
- Shackles
- Air chill. shackle KD, 2 legs | OC.20.038
- Air chilling shackle 2 legs type III | OC.10.037
- Eviscerating shackle 12 mm grey | OC.10.039
- Weighing/cut-up line shackle | OC.10.045
- Pin L=30mm with 4 quarters | OC.10.002.4
- Air chilling shackle 3-P grey | OC.40.098
- Air chill shackle duo+neck | OC.30.021W2
- Air chilling shackle 3-P blue | OC.40.098B
- Air chill shackle, deeper slots, 2 legs type II | OC.10.044
- MX II portioning shackle HD (L) | OC.20.564
- Nuckle joint grey | OC.10.062
- S.S. eviscerating shackle Nuova | OC.20.079
- Air chill shackle 2 legs double | OC.30.036
- Pin for trolley | OC.40.003
- Chill shackle duo incl. neck | OC.30.013K
- S.S. eviscerating shackle | OC.40.001Z
- S.S. suspension rod D=7 L=305 | OC.40.002Z
- Air chilling shackle 3-P orange | OC40.098OR
- MX I portioning shackle HD (L) | OC.20.562
- Pin, green L=25mm | OC.10.021
- Block MX type I / II | OC.20.064
- Synth. rotation block | OC.30.010
- Eviscerating shackle 12 mm green | OC.10.049
- Housing cut up shackle green | OC.10.069
- Tumbler assy | OC.30.017
- Pin for tube track trolley | OC.40.092
- Pin for tube track trolley 4 quarters | OC.40.092.4
- S.S. cut-up weighing shackle | OC.10.018
- Synth.air chill. shackle, 2 legs type II | OC.10.009
- Cut up shackle complete | OC.30.065
- Synth. turning block | OC.30.015
- MX III portioning shackle (broiler) | OC.20.567
- Complete ev. shackle 12mm grey | OC.10.516
- Suspension rod grey L=158mm | OC.10.056
- Pin (shackle onto trolley) L=30mm | OC.10.002
- Pin, grey - 4 quarters L=25mm | OC.20.039.4
- Weighing shackle W1-N grey | OC.10.101
- MX II portioning shackle (broilers) (S) | OC.20.563
- Pin, grey L=25mm | OC.20.039
- Synthetic shaft MX type I / II | OC.20.056
- Shackle holder cage, green | OC.10.076
- End cap for cage, green | OC.10.077
- Physic shackle complete | OC.10.155
- Flex block | OC.30.016
- Complete ev. shackle 12mm green | OC.10.518
- Drop rod for weighing line, N.T. | OC.10.109
- Plastic connector for weighing line | OC.10.020
- Weighing shackle WS1 complete | OC.10.573
- Top assy weighing shackle WS1 | OC.10.574
- Springhousing assembly | OC.10.143
- Pull cap | OC.10.145
- Gland for physic shackle | OC.10.138
- Axial ball bearing | OC.10.144
- Design pin physic shackle | OC.10.152
- Rotary disc physic shackle | OC.10.153
- Synthetic core for rotary disc | OC.10.153A
- DLHS Shackle holder | OC.10.154
- S.S. detector 18x12 d=5 | OC.30.014
- S.S. defeathering shackle type DS | OC.20.018
- Viscera shackle Nuova black | OC.20.521Z
- Frame for the Nuova shackle | OC.20.533
- S.S. defeathering shackle type DS | OC.20.018E
- S.S. Defeathering shackle | OC.10.015
- Physics weighing shackle short | OC.10.146
- Shackle type MX II / III broiler (S) | OC.20.070N
- Shackle MX II / III type HD (L) | OC.20.070H
- S.S. shaft MX type I / II | OC.20.065
- Turnable cut-up shackle 1 bar | OC.10.010
- Turnable cut up shackle | OC.10.536
- Arm R, Type MX II / III | OC.20.071
- Snap-in mechanism | OC.10.070
- Physic shackle complete III | OC.10.187
- Cut up lower shackle, 13mm | OC.10.188
- Pin, green, 4 quarters L=25mm | OC.10.021.4
- S.S. pull rod d=6 L=145mm | OC.10.090
- Chickway shackle, right version | OC.20.012R
- S.S. eviscerating shackle | OC.10.016
- Suspension block | OC.40.118
- Rotation safety block | OC.40.119
- Cut up shackle twist piece | OC.40.176
- Swing lock | OC.40.177
- Fastening block | OC.40.149
- S.S. connecting rod JB-6 | OC.10.017
- Eviscerating shackle 12mm blue | OC.10.039B
- Arm L, Type MX II / III | OC.20.072
- Closing device MX III | OC.20.073
- Weighing shackle W1-N green | OC.10.101V
- Baseplate MX III | OC.20.074
- Weighing/cut-up shackle yellow | OC.10.045Y
- Distribution shackle 12mm green | OC.10.127
- Distribution shackle 12mm grey | OC.10.128
- Pull rod | OC.10.173
- Clamping plate S.S. | OC.10.174
- Shackle housing top half, green | OC.10.175
- Retaining ring S.S. | OC.10.176
- Bushing S.S. WS1 | OC.10.177
- Drop rod set long version | OC.10.998
- Block MX III | OC.20.075
- Physic shackle complete | OC.10.255
- Eviscerating shackle 9 mm grey | OC.10.058
- Eviscerating shackle 10 mm grey | OC.10.060
- Eviscerating shackle 14 mm grey | OC.10.050
- Suspension rod grey L=235mm | OC.10.080
- Suspension rod green L=235mm | OC.10.081
- O-Ring 35x5 | OC.10.089
- Synthetic pin MX II / III | OC.20.069
- Eviscerating shackle 8mm | OC.20.014
- Arm with pin, MX I shackle | OC.20.068
- Nuckle joint green | OC.10.063
- Physic shackle complete N.T. | OC.10.180
- Rotary disc physic shackle N.T. | OC.10.181
- Springhouse assembly | OC.10.182
- Gland for physic shackle | OC.10.183
- Synth. pin | OC.10.184
- Synth. pull cap | OC.10.185
- Cap for pull cap | OC.10.186
- Arm, MX I shackle | OC.20.067
- Physics weighing shackle short | OC.10.147
- S.S. drop rod type E-6-S 6mm | OC.20.013
- Pull rod weighline L=191mm d=6mm | OC.10.004
- Suspension rod L=195mm | OC.10.171
- S.S. cut-up weighing shackle | OC.10.019
- Weighing shackle 2 legs grey 244 gr. | OC.10.104
- Synth. shaft MX III | OC.20.076
- Pin front, white MX III | OC.20.078
- Synth. locking lever | OC.20.099
- Weighing/cut-up line shackle | OC.10.045G
- S.S. defeathering shackle D=7 255x125 | OC.40.004S
- S.S. suspension rod d=7 L=320 | OC.40.005
- S.S. bracket | OC.10.097
- Suspension rod green L=158mm | OC.10.057
- Air chilling shackle 2 legs type III green | OC.10.037V
- Bushing plastic | OC.30.008P
- S.S. turkey shackle d=10mm | OC.40.114A
- Shackle, MX I broiler (S) | OC.20.066N
- MX I portioning shackle broiler (S) | OC.20.561
- Scissor block for the viscera shackle | OC.20.085R
- Synth. block | OC.20.146
- Red pin for the viscera shackle | OC.20.111
- Shackle, MX I HD (L) | OC.20.066H
- Intermediate part | OC.20.035
- S.S. drop rod eviscerator shackle | OC.10.025
- Pivotable part | OC.10.012
- S.S. pin d=8 L=30mm | OC.10.098
- Pin rear, white MX III | OC.20.077
- Pull rod C.t.C.=102mm 2nd | OC.10.068
- Weighing shackle type GS | OC.20.037
- S.S. intermediate part | OC.20.096
- Turnable cut up shackle (mirrored) | OC.10.537
- MX III portioning shackle HD (L)| OC.20.568
- Synth. shaft | OC.20.083
- Synthetic plug | OC.20.084
- Bolt, set | OC.20.091
- S.S. pin, one side knurled | OC.20.057
- Suspension rod Ev. shackle E.S. | OC.20.027
- S.S. connecting link 68x30x8 | OC.20.028
- Retaining ring (Large Bird) | OC.30.018
- Turnable cut-up shackle 2 bars | OC.10.011
- S.S. bracket (mirrored) | OC.10.097A
- Sealing V-ring | 1003.0000.VS30
- Weighing/cut-up shackle blue | OC.10.045B
- Pin for intesting transport line | OC.20.006
- Pin for intesting transport line | OC.20.006A
- Pressure spring | VE.DR.060
- Synth. shaft for shackles weighing | OC.20.108
- Spring for MX type II / III | VE.DR.012
- Divisible corner wheels
- Divisible idler wheel Z=30 | OC.10.572.30DKZ
- Divisible idler rim 6x6" | OC.10.572.66DZ
- Divisible idler wheel Z=18 | OC.10.572.18DKZ
- Divisible idler rim 10x6" | OC.10.572.106DZ
- Divisible idler wheel Z=24 | OC.10.572.24DKZ
- Divisible idler wheel D=266mm | OC.40.266Z
- Divisible idler wheel Z=42 | OC.10.572.42DKZ
- Drive/idler rim 6x6'' | OC.10.014Z
- Drive/idler rim 10x6'' | OC.10.052Z
- Drive wheel Z=18 | OC.Z18.090.6Z
- Drive wheel Z=24 | OC.Z24.090.6Z
- Plain idler wheel 266mm | OC.266.090.6Z
- Drive wheel Z=30 | OC.Z30.090.6Z
- Plain idler wheel 460mm | OC.460.090.6Z
- Divisible idler rim 14x6" | OC.10.572.146DZ
- Drive wheel Z=42 | OC.Z42.090.6Z
- Plain idler wheel 654mm | OC.654.090.6Z
- Divisible wheel cover | OC.10.162
- S.S. shaft L=220, D=40mm | OC.10.156K
- Drive/idler rim 14x6'' | OC.10.099Z
- Drive/idler rim 8x6'' | OC.10.103Z
- Divisible idler rim 8x6" | OC.10.572.86DZ
- S.S. spacer L=70, D=42,4mm | OC.10.157
- T-track & tube track bends
- Compl. T-track bend 90º D=485 | OC.10.485.090.Z30
- Compl. T-track bend 180º D=291 | OC.10.291.180.Z18
- Compl. T-track bend 180º D=388 | OC.10.388.180.Z24
- Tube track bend 180º D=291mm | OC.40.291.180L
- T-track bend 90º D=291mm | OC.10.291.090
- Compl. T-track bend 180º D=291 | OC.10.291.180.66Z
- T-track bend 90º D=485mm | OC.10.485.090
- Compl. T-track bend 90º D=679 | OC.10.679.090.Z42
- T-track bend 180º D=291mm | OC.10.291.180
- Tube track bend 90º D=291mm | OC.40.291.090L
- Compl. T-track bend 90º D=485 | OC.10.485.090.106Z
- Compl. T-track bend 180º D=388 | OC.10.388.180.86Z
- T-track bend 180º D=485mm | OC.10.485.180
- Compl. T-track bend 45º D=485 | OC.10.485.045.106Z
- Compl. T-track bend 180º D=485 | OC.10.485.180.Z30
- Tube track bend 90º D=485mm | OC.40.485.090L
- T-track bend 90º D=388mm | OC.10.388.090H
- Compl. T-track bend 180º D=485 | OC.10.485.180.106Z
- Compl. tube bend 90º D=485 | OC.40.485.090L.106Z
- Tube track bend 180º D=485mm | OC.40.485.180L
- T-track bend frame 90º D=485mm | OC.20.485.090
- T-track bend 180º D=388mm | OC.10.388.180
- Compl. tube bend 90º D=291 | OC.40.291.090L.Z18
- Compl. T-track bend 45º D=291 | OC.10.291.045.66Z
- Compl. tube bend 180º D=291 | OC.40.291.180L.Z18
- T-track bend 45º D=485mm | OC.10.485.045
- T-track bend 90º D=679mm | OC.10.679.090
- Compl. T-track bend 90º D=291 | OC.10.291.090.Z18
- Compl. tube bend 180º D=291 | OC.40.291.180L.66Z
- Compl. T-track bend 45º D=388 | OC.10.388.045.Z24
- T-track bend 45º D=291mm | OC.10.291.045
- Compl. T-track bend 90º D=291 | OC.10.291.090.66Z
- Compl. T-track bend 45º D=388 | OC.10.388.045.86Z
- Tube track bend 180º D=388mm | OC.40.388.180L
- Tube track bend 90º D=388mm | OC.40.388.090L
- Compl. tube bend 90º D=485 | OC.40.485.090L.Z30
- Compl. tube bend 90º D=291 | OC.40.291.090L.66Z
- Compl. T-track bend 45º D=485 | OC.10.485.045.Z30
- Compl. tube bend 180º D=388 | OC.40.388.180L.Z24
- Compl. tube bend 180º D=485 | OC.40.485.180L.Z30
- Compl. tube bend 90º D=388 | OC.40.388.090L.Z24
- Compl. T-track bend 90º D=388 | OC.10.388.090H.Z24
- Compl. T-track bend 45º D=291 | OC.10.291.045.Z18
- Compl. tube bend 180º D=485 | OC.40.485.180L.106Z
- T-track bend 45º D=388mm | OC.10.388.045
- Tube track bend 180º D=291mm | OC.40.291.180
- Compl. T-track bend 90º D=388 | OC.10.388.090H.86Z
- Tube track bend 45º D=485mm | OC.40.485.45
- T-track bend 180º D=679mm | OC.10.679.180
- T-track bend frame 180º D=291mm | OC.20.291.180
- T-track bend frame 90º D=291mm | OC.20.291.090
- Compl. tube bend 180º D=291 | OC.40.T291.180.266Z
- Compl. tube bend 180º D=291 | OC.40.291.180L.266Z
- Compl. tube bend 90º D=291 | OC.40.291.090L.266Z
- Compl. tube bend 180º D=291 | OC.40.T291.180.Z18
- T-track bend frame 180º D=485mm | OC.20.485.180
- Compl. tube bend 180º D=291 | OC.40.T291.180.66Z
- Tube track bend 45º D=291mm | OC.40.291.045
- Tube track bend 180º D=485mm | OC.40.485.180
- Tube track closing cap | OC.40.093
- S.S. mounting bracket | OC.40.291.D
- Idler wheels and segments
- Idler wheel 10x6" D=485mm S.S. hub | OC.10.527R
- Idler wheel 6x6" D=291mm S.S. hub | OC.10.506R
- Idler wheel 8x6" D=388mm S.S. hub | OC.10.545R
- Idler wheel 6x10" D=485mm | OC.10.543R
- Idler wheel 14x6" D=679mm S.S. hub | OC.10.542R
- Idler wheel 10x6" D=485mm alu. hub | OC.20.527
- Idler rim 10x6" D=485mm bore=155mm | OC.10.052
- Idler rim 6x6" D=291mm bore=155mm | OC.10.014P
- S.S. shaft D=40 L=222mm | OC.10.026M
- S.S. bearing housing idler wheel | OC.10.027R
- Alu. idler wheel hub bore=50mm | OC.10.083
- Drive wheel Z=18 bore=90mm | OC.Z18.090.4Z
- Idler rim 8x6" D=388mm bore=155mm | OC.10.103P
- Idler rim 6x10" D=485mm bore=155mm | OC.10.096
- Drive/idler rim 10x6" D=485mm bore=400mm | OC.10.003
- Idler rim 14x6" D=679mm bore=155mm | OC.10.099
- Idler rim 15x4" D=485mm bore=155mm | OC.10.102
- Drive/idler rim 16x6" D=776 | OC.10.084
- Idler rim 9x4" D=291mm bore=155mm | OC.10.035
- Drive/idler rim 15x4 D=485mm bore=400mm | OC.10.036
- Drive/idler wheel 6x10" D=485mm bore=400mm | OC.10.085
- Drive/idler rim 14x6" D=679mm bore=400mm | OC.10.099B
- Drive/idler rim 21x4" D=679mm bore=155mm | OC.10.105
- Drive/idler rim 8x10" D=647 bore=400mm | OC.10.108
- Idler wheel segment 6" | OC.10.042
- Idler wheel segment 4"/8" | OC.10.043
- Idler wheel segment 14x6'' | OC.10.053
- Chain wheel segment 16x6" | OC.10.120
- Drive wheel Z=42 bore=90mm | OC.Z42.090.4
- Drive wheel Z=42 bore=400mm | OC.Z42.400.5Z
- Drive wheel Z=30 bore=90mm | OC.Z30.090.4
- Drive wheel Z=30 bore=60mm | OC.Z30.060.4Z
- Drive/idler rim 15x4" for cable, bore=155 | OC.20.102
- Guide wheel 6x6" D=291mm | OC.20.145
- Idler wheel 6x6" D=291mm incl. shaft | OC.20.145B
- Guide wheel 10x6" D=485mm | OC.20.117
- Journal | OC.20.150
- Special disc | OC.20.157
- Journal | OC.20.158
- Ring | OC.20.159
- Sealing ring | OC.20.165
- S.S. shaft complete with sil.housing | OC.40.018
- Alu. hub for drive wheel | OC.40.060
- Drive shaft | OC.40.062
- Flange hub Ø 60/90x50 | OC.40.102
- Flange hub Ø 60/90x71 | OC.40.160
- Nylon idler wheel 264x27 | OC.40.264
- Drive wheel Z=15 bore=60mm | OC.Z15.060.4
- Drive wheel segment 8" | OC.20.008
- Idler wheel segment 10x6" | OC.20.009
- Idler wheel segment 8" | OC.20.010
- Drive segment 6" D=485mm | OC.20.020
- Drive segment 6" D=291 | OC.20.021
- Idler wheel segment 6" | OC.20.022
- Idler wheel segment 6" D=291mm | OC.20.023
- Upper cover plate idler wheel | OC.10.028
- Lower cover plate idler wheel | OC.10.029
- S.S. shaft D=50 L=214mm | OC.20.051
- Aluminium bearing housing | OC.20.059
- Cover plate idler wheel | OC.20.061
- Sealing V-ring | 1003.0000.VS50
- Ball bearing 6208 2RS | 1002.0000.0014
- Ball bearing 30207 | 1002.0000.0010
- Tensioners
- Drive units
- Drive unit compl. D=485mm 90º | OC.40.D485.090R.30Z
- Drive unit compl. D=291mm 90º | OC.40.D291.090R.18Z
- Drive unit base plate D=485mm 180º | OC.10.D485.180
- Drive unit compl. D=291mm 180º | OC.40.D291.180.18Z
- Drive unit base plate D=485mm 90º | OC.10.D485.090M
- Drive unit base plate D=485mm 90º | OC.40.D485.090R
- T-track and tube track profiles
- S.S. up part 30 degrees | OC.10.064.30
- S.S. down part 30 degrees | OC.10.065.30
- S.S. T-track 50x50x5 L=2000mm with lugs | OC.10.047AR.2000
- S.S. welding lug | OC.10.047AR
- S.S. tube track down part 30º | OC.40.048.30
- S.S. tube track up part 30º | OC.40.049.30
- S.S. tube track 42,4x2,0 L=6000mm | OC.30.6000
- T-plate for suspending tube track system | OC.40.101
- S.S. up section 30 degrees | OC.20.048SS
- S.S. down section 30 degrees | OC.20.049SS
- S.S. T-track 50x50x5mm incl. lugs | OC.20.050SS
- S.S. connection piece L=65 | OC.20.044SS
- Fixed Suspension set 1" | OC.40.050.BC
- Cam wheels
- Cam wheel D=50mm | OC.40.502
- Cam wheel D=49mm | OC.40.501
- Cam wheel D=44mm | OC.40.500
- Synth. cam roller | OC.40.519
- Cam wheel D=45mm | OC.40.503
- Cam wheel without thread | OC.40.514
- Cam wheel 50x25 with curved surface | OC.40.153
- Cam wheel 50x25 with 6202 bearing | OC.40.154
- Cam wheel 50x25 flat running surface | OC.40.155
- Shackle guidance
- Shackle guidance inlet | OC.10.123
- S.S. shackle guide bar | OC.10.122
- Shackle guidance outlet | OC.10.132
- Shackle guidance | OC.10.124
- Swivel block B=30 | OC.10.111
- Swivel block B=50 | OC.10.112
- Wedge pivotable | OC.10.163
- Wedge | OC.10.164
- Wedge pivotable | OC.10.165
- Turning segment | OC.10.190
- Turning block | OC.10.191
- Wedge alter | OC.10.208
- Synth. guide for MX "NT" | OC.20.100
- Synth.shackle turning | OC.20.101
- Lever | OC.20.109
- Synth. guide for MX shackle turning | OC.20.112
- Synth. guide for shackle turning | OC.20.113
- Shackle turning | OC.20.114
- Cam piece | OC.20.124
- Shackle guidance | OC.20.125
- Shackle guidance | OC.20.126
- Guide | OC.20.127
- Guide | OC.20.128
- Shackle guidance | OC.20.129
- Guide | OC.20.133
- Guide | OC.20.135
- Shaft for shackle guidence | OC.20.144
- Guide | OC.20.152
- Guide | OC.20.156
- Guide turning station | OC.20.161
- Location pin | OC.20.162
- Guide | OC.20.163
- Guide | OC.20.166
- Assembled chain
- Defeathering machine
- Bearing race assy, complete | PL.20.509
- Bearing race complete | PL.20.508
- Bearing housing complete O.T. | PL.10.501
- Bearing housing complete N.T. | PL.10.502
- Alu. picker bearing housing | PL.10.001
- Bearing housing assy/short shaft | PL.40.501
- Bearing housing assy/long shaft | PL.40.502
- Synthetic bearing race | PL.20.028
- Alu. bearing housing | PL.30.009
- Picker shaft N.T. L=166mm | PL.20.025
- Picker belt pulley v-belt | PL.20.032
- White gear wheel Z=40 L.H. | PL.40.002
- Black gear wheel Z=40 R.H. | PL.40.009
- Alu. finger disc 6 holes V left | PL.40.003
- Alu. finger disc 6 holes H right | PL.40.004
- Coupling sleeve UC DC 42 S | PL.40.005
- Synth. black dust cap | PL.40.010
- Ring 62,5x21mm | PL.20.029
- Ring 50,5x28,4mm | PL.20.030
- Ring 50,5x23,4mm | PL.20.031
- S.S. finger disc, 8 holes | PL.20.033
- S.S. finger disc, 10 holes | PL.20.034
- S.S. mounting plate | PL.20.036
- Compl. bearing housing with 10 holes | PL.20.501
- Compl. bearing housing with 8 holes | PL.20.505
- Alu. finger disc 10 holes | PL.20.010
- Alu. finger disc 8 holes | PL.20.012
- S.S. picker shaft N.T. L=170mm | PL.10.004
- S.S. picker shaft O.T. L=170mm | PL.10.003
- Cast iron bearing housing | PL.20.015
- Picker belt pulley flat face | PL.20.018
- Picker belt pulley crowned | PL.20.019
- Picker belt pulley knurled | PL.20.020
- Labyrinth disc | PL.20.013
- V belt pulley | PL.20.042
- White conical Gearwheel Z=40 | PL.40.002C
- Black conical Gearwheel Z=40 | PL.40.009C
- S.S. picker shaft short L=115mm | PL.40.007
- S.S. picker shaft long L=147mm | PL.40.008
- Toothed coupling bore=25mm | PL.40.014
- Picking finger M5/55 black | PV.00.065
- S.S. finger plate 12 holes | PL.10.008
- Alu. finger plate holder 12 holes | PL.10.010
- Finger disc complete with hub 12 holes | PL.10.503
- S.S. finger plate 6 holes | PL.10.036
- Alu. finger plate holder | PL.10.037
- S.S. ring | PL.10.038
- Alu. picker belt pulley D=150x65 | PL.10.011
- Motor pulley D=150x85 bore=38mm | PL.10.012
- Motor pulley D=150x85 | PL.10.013
- Gearbox W 86 U 80 HS | PL.10.035B
- Drive belt 3800 double V | PL.20.026
- Drive belt 4200 double V | PL.20.027
- Drive belt 4066 double V | PL.20.061
- Picker belt pulley D=100x85mm | PL.10.023
- Motor pulley D=100x100mm | PL.10.014
- Motor pulley D=125x85 | PL.10.026
- Motor pulley D=125x85 | PL.10.027
- Drive belt 4130x60 | PL.10.005
- Drive belt 5050x60 | PL.10.006
- Drive belt 3810x80 | PL.10.007
- Drive belt 3820x80 | PL.10.020
- Drive belt 5060x60 | PL.10.021
- Drive belt 4140x60 | PL.10.022
- Drive belt 4040x60 | PL.10.029
- Drive belt 4080x60 | PL.10.031
- Drive belt 4150x60 | PL.10.054
- Drive belt 3980x60 | PL.10.055
- Drive belt 4090x60 | PL.10.056
- Drive belt 3800x45 | PL.20.003
- Drive belt 4210x45 (D10) | PL.20.006
- Shaft short incl. S.S. drip cap | PL.40.007A
- Shaft long incl. S.S. drip cap | PL.40.008A
- Coupling sleeve UC DC 28 S | PL.40.011
- Gear Z=12 | PL.40.013
- Coupling half UCDC bore 28mm | PL.40.032
- Shaft D=25 L=170mm | PL.40.601
- Shaft D=25 L=85mm | PL.40.605
- Shaft D=30 L=192mm | PL.40.606
- V-belt pulley bore=25mm | PL.40.607
- Gear wheel Z=26 B=26 hole=24 | PL.40.001
- S.S. spacer | PL.40.017
- Hand wheel 17/145mm | PL.40.020
- Greasing bolt M12x20 | PL.40.030
- Picker v-belt pulley | PL.40.079
- S.S. locking pin | PL.40.082
- Tensioner V-belts | PL.20.527
- Tension roller V-belt | PL.20.050
- Plate | PL.20.064
- Guide | PL.20.065
- Guide | PL.20.066
- Compr.spring for motor mounting | VE.DR.035
- Washer, countersunk | PL.40.085
- Brass bush | PL.45.017
- S.s. pipe bushing | PL.40.142
- Rubber stuffing box | PL.40.145
- Elbow connector s.s 1/4" | PL.40.148
- S.s. washer, countersunk | PL.40.152
- Guide for telescope arm | PL.40.154
- Sunk key 8x7x50 | 1006.6885.8750
- Bearing housing with long shaft | PL.30.504
- Picker shaft short L=110mm | PL.30.001
- Picker shaft long L=140mm | PL.30.002
- Synth. gear wheel Z=50 R.H. | PL.30.003
- Synth. gear wheel Z=50 L.H. | PL.30.004
- Alu. motor gear Z=26 | PL.30.007
- Flange gear Z=50 | PL.30.008
- Picking finger M5/45 black | PV.00.059
- Picking finger M5/60 black | PV.00.070
- Picking finger LC75-68 hard red | PV.00.084
- Picker shaft turkey picker | PL.15.002
- Watercap for the turkey picker | PL.15.005
- Spacer sleeve for turkey picker | PL.15.006
- Flange for turkey picker | PL.15.007
- S.S. extended picker shaft | PL.15.008
- Picker shaft (gear wheel version) | PL.15.009
- Gasket for bearing housing | PL.20.014
- Distance ring for bearing 6204 | PL.20.017
- Distance ring incl. keyway | PL.30.010
- S.S. finger disc 9 hole | PL.60.001
- Synth. finger disc 9 hole | PL.60.001A
- Alu. finger disc holder | PL.60.002
- S.S. finger disc 6 holes | PL.60.003
- Ring jack | PL.60.007
- Plate | PL.60.008
- Rack L=800 | PL.60.028
- Bronze gear for motor L.H. | PL.60.032
- S.S. spacer | PL.10.015
- S.S. bush L=61mm | PL.20.035
- S.S. bush L=18,0mm | PL.20.037
- S.S. flat washer M12 special | PL.20.039
- Ball bearing 6304 ZZ | 1002.0000.0036
- Seal 20/52x7 double lip | 1003.0000.0007
- Seal 30x52x7R | 1003.0000.0008
- Seal 20/52x9 double lip | 1003.0000.0057
- Circlip bore 52mm | 1005.0472.0052
- Pressure plug 1/8" | 1004.0000.0101
- Grease fitting 1/8 straight | 1004.0000.0001
- Locking ring MB4 | 1001.5406.0003
- Round nut incl. groove KM4 | 1001.0981.0003
- Sunk key 5x5x10 | 1006.6885.5510
- Seal 30/47x10 | 1003.0000.0010
- Ball bearing SKF 6205-2RS C3 | 1002.0000.SKF4
- Ball Bearing 30304A | 1002.0000.0035
- Gizzard harvester
- Peeler shafts D=17 mm (2 pcs) | GH.20.504N
- Wear bushing D=36mm O.T. | GH.10.006
- Set peeler shafts (4 pcs) upper high yield | GH.10.518
- Bronze compression ring | GH.10.008
- Wear bushing D=35mm N.T. | GH.10.007
- Set pinch-off rolls Z=20 (2 pcs.) | GH.10.514
- Set pinch-off rolls Z=26 (2 pcs.) | GH.10.501
- Complete carrier chain CD8000 | GH.10.504
- Ejection wheel for the CD6000 | GH.10.044
- Peeler shafts D=14 mm (2 pcs) | GH.20.505
- S.S. bearing block | GH.10.010
- Strip L=755mm | GH.20.069
- S.S. peeler shaft bearing block | GH.10.017
- Manual control table peeler shafts (set) | CT.10.501
- Complete carrier chain CD6000 | GH.10.502
- Manual control table peeler shaft set | CT.20.501
- Manual control table peeler shaft set | CT.20.502
- Spiral gut gears Z=25 (set) M60/M80 | GH.20.508
- Bevel gearbox V120 1:1 | GH.10.023
- Alu peeler shaft bearing block | GH.10.018
- Needlebearing 4906 2RS RNA | GH.10.011
- S.S. ring 35x11 | GH.10.084
- Set conveyor shafts CD6000 | GH.10.505
- Peeler rollers set "upper" | GH.40.504
- Bearing block | CT.10.005
- Gearbox 1:1 | GH.20.021
- Presser wheel D=134x22 7 slots | GH.20.039
- Connecting shaft for peeler shafts | GH.10.040
- Ejection wheel for the CD8000 | GH.10.053
- Spiral gut gears Z=25 (set) (M60) | GH.20.503
- Spiral gut gears Z=31 (set) (MG60/MG80) | GH.20.509
- Conveyor screws (set) MG60 | GH.20.510
- Peeler shafts (2 pcs.) (M60) | GH.20.500
- S.S. Cleaning wheel | GH.10.054
- Motor | GH.10.059W
- Transport chain | GH.30.008
- Flange bearing GLCTE 20 | GH.10.035
- Flange bearing GLCTE 25 | GH.10.036
- Sprocket chain wheel 1/2" Z=12 | GH.10.024
- Gear wheel Z=48 M2 | CT.10.008
- Guidance set CD6000 | GH.10.506
- Guidance set CD8000 | GH.10.507
- Complete autogard coupling | GH.10.517
- Alu bearing block support | GH.10.042
- Alu bearing block | GH.10.075
- Bearing block for conveyor shafts | GH.10.043
- Set peeler shafts (4 pcs.) | GH.10.500
- S.S. bypass wheel | GH.10.019
- Set peeler shafts (4 pcs) lower high yield | GH.10.519
- Peeler rollers set (2 pieces) "Lower" | GH.40.505
- Shaft | GH.20.072
- Special sprocket | GH.20.073
- Sprocket Z=23 | GH.20.074
- Special stud | GH.20.075
- Sprocket Z=24 | GH.20.076
- Special sprocket | GH.20.077
- Sprocket Z=14 | GH.20.078
- Sprocket Z=19 | GH.20.079
- Special nut | GH.20.080
- Duplex sprocket wheel | GH.20.081
- Special sprocket wheel | GH.20.082
- Special nut | GH.20.083
- Shaft | GH.20.084
- Support | GH.20.087
- Lock cover | GH.20.088
- Bush | GH.20.089
- Shear pin | GH.20.090
- Special threaded rod | GH.20.091
- Sprocket Z=25 | GH.20.092
- Plate for peeler rollers | GH.20.093
- Bearing block | GH.20.094
- Flange | GH.20.096
- Flat jet spray nozzle | GH.20.097
- Flat jet spray nozzle | GH.20.099
- Clutch / coupling | GH.20.100
- Ring | GH.20.102
- Bushing | GH.20.109
- Motorreductor 3kW | GH.20.038
- Collar bearing bushing 18x22 L=18 | LBK18/22x18S
- Peeler shafts set (2 pcs) | GH.30.501
- Bearing block peeler rollers | GH.10.085
- Guide plate gizzard spreader | GH.10.086
- Threaded rod M10 65x65 | GH.10.087
- Gizzard spreader spray pipe | GH.10.088
- Shaft ø15 | GH.10.089
- Shaft | GH.10.092
- Flange bearing 35 | GH.10.099
- Main shaft CD6000 | GH.10.097
- S.S. pointed chain 1/2" | KE.PU.2BIBU
- S.S. pointed chain 1/2" | KE.PU.2BU
- S.S. connection link | KE.PU.SLT
- Spray nozzle | GH.10.060
- Disc gear 1/2" Z=22 | GH.10.022
- Set pinch-off rolls Z=16 (2 pcs.) | GH.10.515
- Bronze ring | GH.20.045
- Peeler shafts (2 pcs) M60 | GH.20.511
- Disc D=115x22,5mm | GH.20.009
- Torque limiter VKW 30 | GH.10.521
- Set peeler shafts (4 pcs.) CD8000 low | GH.10.503
- Set conveyor shafts CD8000 | GH.10.510
- Gear wheel Z=80 M2 steel | CT.10.009
- Peeler rollers set (2 pieces) | GH.40.506
- Peeler rollers set (2 pcs) | GH.40.501
- Disc D=115x20,5mm | GH.20.008
- Sprocket chain wheel Z=12 | GH.10.024V
- Bronze cilindrical bushing | GH.20.017
- Torque Limiter (MG60/MG80) | GH.20.041
- Set pinch-off rolls Z=20 (2 pcs.) | GH.40.507
- Peeler shafts set | GH.40.512
- Gear wheel with hub | GH.40.517
- S.S. chain wheel Z=6 3/4" | GH.10.009
- Sprocket Z=18 | GH.20.003
- Spreading bar CD6000 | GH.10.522
- S.S. shaft L=62mm | GH.20.054
- Spiral gut gears Z=29 (set) (M60) | GH.20.502
- Stamper unit | GH.10.527
- S.S. plug | GH.20.020
- S.S. bearing block (M80) | GH.20.014
- S.S. ring | GH.20.019
- Hardened bushing | GH.20.016
- S.S. ring | GH.10.063
- Guide plate | GH.10.066
- Bearing housing | GH.10.067
- S.s shaft | GH.10.068
- S.S. bearing block (M60/M80) | GH.20.015
- Chain wheel 1/2" Z=33 bore 22 | GH.20.029
- Right angle bevel gearbox V140-E 1:1 | GH.10.094
- Guide plate | GH.10.106
- Motor reductor 1,50 kW M1 | 1100.0200.1518
- Rollerchain 1/2" 08B1 | KE.RS.08B1
- Rod eye bi M10x1,5 | 1004.00BI.1011
- S.S. bushing (M60/M80) | GH.20.018
- Knife ring | GH.20.026
- S.S. guide | GH.20.051
- S.S. ring | GH.20.056
- Bronze slide block | GH.20.012
- Cover plate | GH.20.024
- S.S. bush | GH.20.053
- Sprocket chain wheel Z=16 | GH.40.001
- Cleaning / ejection wheel upper | GH.40.002
- Special plate | GH.20.048
- S.S. ring | GH.20.055
- S.S. holder | GH.20.058
- Shaft | GH.20.027
- S.S. bearing block | GH.20.042
- Alu. ring | GH.20.062
- S.S. bush | GH.20.065
- S.S. flange | GH.20.025
- Sprocket 1/2” Z12 | GH.10.041
- S.S. intermediate sleeve | GH.10.062
- Rod eye bi M10x1,25 | 1004.00BI.1010
- Ball bearing 2205 TVH | 1002.0000.0038
- Tensioner SE 18 | GH.10.513
- Cleaning / ejection wheel lower | GH.40.003
- Drive shaft | GH.40.036
- Sprocket Z=26 | GH.40.038
- Sprocket Z=29 | GH.40.039
- S.s. shaft | GH.40.040
- Sprocket 1/2" Z=21 | GH.40.041
- Drive shaft for small segment chain | GH.40.044
- Coupling with keyway | GH.40.045
- Chain wheel, Z=21 with Ø6 holes | GH.40.049
- Gear wheel pom Z=19 | GH.40.054
- Friction disc | GH.40.055
- Lock plate S.S. | GH.40.056
- Chain wheel, Z=21 | GH.40.057
- Shaft for gear wheel | GH.40.058
- Upper peeler block | GH.40.064
- Lower peeler block | GH.40.065
- Peeler block outfeed | GH.40.066
- Seal 35/47x5 | 1003.0000.0016
- S.S. guide | GH.20.060
- S.S. ejector | GH.20.066
- S.S. housing | GH.20.057
- S.S. flange | GH.20.059
- S.S. tube 124x52x44,5mm | GH.20.061
- S.S. ring D=38 Bore=30 | GH.20.068
- S.S. stud | GH.20.052
- S.S. plug | GH.20.064
- Shaft 20x74mm | GH.20.023
- Single reducing link | KE.RS.08B1.VS
- Manual control table peeler shaft (set) | CT.30.501
- Collar bearing bushing 14x18 L=26 | LBK14/18x26
- Spring dr=1,25 Du=13,1 L=42 Nt=6 A+S | VE.DR.015
- Bearing bushing | LBC16/20x20
- Collar bearing bushing 17x21 L=26 | LBKIJ17/21X26
- S.S. circlip | 1005.0472.SS35
- Low nut M10 | 1001.0439.0010
- Collar bearing bushing | LBK36/45x36
- Cropping machine
- Complete cropper unit | CM.10.502
- Cropper drill unit compl. | CM.10.510
- Roller carrier compl. | CM.10.511
- Drill unit | CM.10.512
- Spindle N.T. pitch 50 L=635mm | CM.10.012
- Centre segment 16/12 | CM.40.016
- Probe tip | CM.10.007
- Rollers | CM.10.013
- Slide block for conical curve | CM.10.008
- Roller carrier | CM.10.036
- Infeed segment 16/12 Cw | CM.40.015
- Drive rod type I | CM.10.001
- Synth. bearing assy (lower) | CM.20.502
- Complete spindle holder new style | CM.10.504
- Motor incl. gearbox | CM.10.508
- Lock bush LH thread | CM.40.006
- Lock bush RH thread | CM.40.010
- Topring drive rod | CM.10.011
- Drive rod type II L=735mm | CM.10.020
- S.S. Lock nut | CM.10.025
- Infeed segment left 24/18 | CM.40.020
- Cropper shaft only L=365mm | CM.10.006
- Drill (standard) 30x26 L=150mm | CM.10.031
- Synth. bearing bushing assy. | CM.20.501
- Outfeed segment Cw | CM.40.017
- Centre segment 24/18 | CM.40.021
- Hardened pin | CM.10.002
- Complete pin with S.S. bearing | CM.10.503
- Dust cap for hardened pin | CM.10.009
- Bearing holder O.T. | CM.10.003
- Spindle New type | CM.10.028
- Spindle ring | CM.10.037
- Drill pipe tube L445mm | CM.10.040
- S.S. lock nut | CM.10.033
- Lock hub | CM.10.039
- Rollers N.T. | CM.10.041
- Sliding block | CM.10.042
- Intermediate bush | CM.10.043
- Probe L.H. | CM.20.001
- Cropper shaft only, L=470mm | CM.10.021
- Drive rod D=25mm L=820mm | CM.10.101
- Spindle holder | CM.10.017
- S.S. ring spacer | CM.10.004
- Ball bearing 6082Z Z15 SS | 1002.0000.0002
- Covering plate | CM.10.022
- Compr. spring D263 M-04 | VE.DR.038
- S.S. locking ring | 1001.5406.0010
- Ball bearing 6205 2RS SS | 1002.0000.SS04
- Ball bearing 626 H ZZ SRL | 1002.0000.0016
- S.S. ball bearing 626 H ZZ SRL | 1002.0000.SS16
- Roll complete | CM.30.505
- Hardened ring | CM.40.001
- Collar bearing bushing | CM.40.003
- Gear wheel 16/12 Cw | CM.40.005
- Collar bearing bushing | CM.40.008
- Gear wheel 24/18 Cw | CM.40.018
- Probe holder LH | CM.40.023A
- Infeed segment 16/12 Ccw | CM.40.025
- Coupling half 3 | CM.40.026
- Coupling | CM.40.027
- Plastic insert for coupling | CM.40.028
- Drive wheel Z=48 | CM.40.034
- Gear wheel 16/12 ccw | CM.40.035
- Picker V-belt pulley B160 | CM.40.037
- Bearing housing flange | CM.40.038
- Spacer sleeve | CM.40.039
- Picker V-belt pulley B-160 | CM.40.041
- Bush | CM.40.045
- Gear segment ingoing 24/18 CCW | CM.40.072
- Unit probe Cw L=673mm | CM.40.073
- Gear segment spacer | CM.40.080
- Coupling Ø19 | CM.40.088
- Coupling Ø24 | CM.40.089
- Square drive shaft | CM.40.090
- Unit probe CCW L=537mm | CM.40.091
- Gear wheel 24/18 Ccw | CM.40.092
- Gear segment outgoing 24/18 Ccw | CM.40.098
- S.S. intermediate shaft L=660mm | SA.10.009
- Intermediate shaft L=760mm | SA.10.013
- S.S. intermediate shaft L=700mm | SA.10.026
- S.S. bush | CM.20.003
- Hose clamp | CM.20.007
- Hose | CM.20.008
- Outerpipe with RH thread | CM.20.014
- Outerpipe with LH thread | CM.20.015
- S.S. circlip ø52 | 1005.0472.SS52
- Collar bearing bushing 15x19 L=16 | LBK15/19x16
- S.S. locking ring | 1001.5406.SS08
- Round nut KM 14 | 1001.0981.0010
- Ball bearing 1211 K C3 | 1002.0000.0069
- Rehanger
- Synth. cutting ring 614x10 | RH.10.001
- Collar bushing D=40xD=20 | RH.10.003
- Pawl roller D=20 | RH.10.004
- Synth. spring roller D=22 | RH.10.005
- Alu. V-belt disc | RH.10.008
- Bronze collar bushing L=32 | RH.10.009
- Pawl roller D=30 d=15,5 L=25 | RH.10.011
- Spring roller D=33 d=25 L=15 | RH.10.012
- S.S. pin in behalf of spring L=21 | RH.10.016
- S.S. pin in behalf of spring L=28 | RH.10.016Z
- Synth. support roller D=40 | RH.10.018
- Roller D=22 | RH.10.019
- Roller D=26 L=24 | RH.10.020
- Roller 25x12x11 | RH.10.022
- Roller 26x10x23 | RH.10.023
- S.S. bushing | RH.10.025
- Synth. slide block | RH.10.026
- Bearing LFR 50/8 NPP VA | RH.10.029
- Synthetic rail D=1001 mm | RH.10.030
- Synthetic rail D=800 mm | RH.10.037
- Carrier plate | RH.10.031
- Synth. support roller D=33 | RH.10.033
- S.S. distance bushing | RH.10.034
- S.S. distance bushing | RH.10.035
- Bronze carrier block | RH.10.038
- S.S. locking plate RH | RH.10.043
- S.S. locking plate LH | RH.10.044
- Centering bracket | RH.10.046
- S.S. bearing shaft L=25 | RH.10.047
- Alu. slide block | RH.10.049
- Bushing synth. | RH.10.050
- Alu. carrier 58x54x37mm | RH.10.053
- Alu. plate | RH.10.054
- Lever | RH.10.055
- Lever | RH.10.056
- Bearing adjusting block | RH.10.060
- Mounting block | RH.10.061
- Synth. lower block | RH.10.062
- Synth. carrier plate | RH.10.064
- Alu. base plate | RH.10.065
- Carriage shaft | RH.10.067
- Pressure plate | RH.10.070
- Friction ring | RH.10.071
- Plate | RH.10.072
- Ring | RH.10.073
- Bearing for product carrier | RH.10.075
- Shock absorber | RH.10.076
- Plate | RH.10.077
- Stud bolt M6/M6 | RH.10.078A
- Catch plate | RH.10.079
- Plug | RH.10.083
- Catch plate | RH.10.087
- Catch plate | RH.10.087M
- Pawl, block LH | RH.10.092
- Pawl, block RH | RH.10.092M
- V-Rope | RH.10.095
- Synth. lower slide block | RH.10.099
- Torsion Spring VM 155 | VE.TO.003
- Torsion spring R rehanger def/ev line | VE.TO.004
- Torsion spring rehanger ev/chill VM170 | VE.TO.005
- Torsion spring rehanger ev/chill | VE.TO.006
- Compr. spring D117N | VE.DR.016
- Compr. spring D-339C | VE.DR.058
- Torsion spring VM-601 | VE.TO.017
- Torsion spring VM317 | VE.TR.002
- Bearing housing PCJ 45 S.S. | 1002.0000.SS86
- Pawl for rehanger ev./chill. 002L | RH.10.502
- Pawl for rehanger ev./chill. 001R | RH.10.503
- Pawl for rehanger def./ev. RH | RH.10.505
- Pawl for rehanger def./ev. LH | RH.10.506
- Carrier wagon complete | RH.10.509
- Ejection unit 12mm | RH.10.510
- Catchring 10X6 LH | RH.10.513
- Catchring 10X6 RH | RH.10.514
- Roller incl. bushings | RH.10.516
- Transfer unit weighing V-plate | RH.10.517
- Coupling assembly | RH.10.518
- Intermediate shaft L=397 | SA.10.016
- Cardan coupling | OC.10.192
- Aircylinder DSNU.25-40 PPV-A | 1007.DSNU.2540
- Aircylinder DSNU.2525 PPV-A | 1007.DSNU.2525
- Sensor E2A-M1 5 mtr. | EC.10.013
- Motor 1,00kW B14 | 1100.0100.1001
- Motorreductor 0,37kW M2 | 1100.0200.3711
- Bearing PCJ 60 | 1002.0000.0077
- Synth. carrier block 70x23x23 | RH.20.001
- Synth. carrier block 75x27x20 | RH.20.002
- Support roller buffer rehanger | RH.20.003
- Bearing for support roller | RH.20.004
- Carrier plate 130x80/65x8 | RH.20.006
- Carrier plate 130x65x8 | RH.20.007
- Roll | RH.20.010
- Roll for TR 1 G | RH.20.011
- S.S. distance ring 11x8x10,5 | RH.20.012
- Synth. collar bushing L=16 | RH.20.014
- S.S. bearing bushing | RH.20.015
- Buffer | RH.20.016
- S.S. plate 130x120x6 | RH.20.020
- S.S. plug L=21 D=11 | RH.20.021
- S.S. pin 6x49 | RH.20.026
- S.S. block 34x20x10 | RH.20.027
- Friction block | RH.20.029
- Ring | RH.20.030
- Roller bearing assy 34x27,5x8 | RH.20.039
- S.S. plate for carrier block | RH.20.040
- S.S. shaft D=16 L=103 | RH.20.042
- Synth. curve roll L=32 | RH.20.045
- Synth. carrier block 75x32x16 | RH.20.052
- Synth. guide | RH.20.053
- Synth. guide | RH.20.054
- Synth. guide | RH.20.055
- Synth. curve insert | RH.20.056
- Shaft | RH.20.057
- Flanged bearing bush | RH.20.058
- Plug L=55 | RH.20.059
- Plug | RH.20.060
- Flanged bearing bush | RH.20.061
- Synth. cam insert | RH.20.064
- Friction disc | RH.20.065
- Long arm support | RH.20.066
- Complete lock "MX" side | RH.20.502
- Cam insert "MX-side" | RH.20.068
- Reversing roll | RH.20.070
- Sprocket | RH.20.091
- Strip special | RH.20.095
- Single coupler link | RH.20.097
- Proximity switch | RH.20.098
- Vibration absorber | RH.20.103
- Sprocket Z=36 | RH.20.105
- Sprocket Z=30 | RH.20.106
- S.S. threaded nut | RH.20.108
- Bushing | RH.20.109
- Fixed bolt | RH.20.110
- Bush | RH.20.111
- Special plate | RH.20.112
- Base plate | RH.20.113
- S.S. stopper | RH.20.114
- Pressure ring | RH.20.115
- Shaft | RH.20.116
- Disc | RH.20.117
- Shaft | RH.20.118
- Ratchet | RH.20.119
- Ratchet | RH.20.120
- Synth. block | RH.20.121
- Special bolt (16mm) | RH.20.122
- Special bolt (25mm) | RH.20.123
- Special bolt (30mm) | RH.20.124
- Carrier ring | RH.20.128
- Ground plate | RH.20.129
- Sprocket | RH.20.131
- Guide block | RH.20.132
- Friction block | RH.20.133
- Plate | RH.20.134
- Ratchet | RH.20.137
- Stopper | RH.20.138
- Hinge cylinder 50 | RH.20.139
- Presser | RH.20.140
- Synth. block | RH.20.142
- Cam insert | RH.20.145
- Guide | RH.20.146
- Lever | RH.20.147
- Hub | RH.20.148
- Ring | RH.20.149
- Shaft | RH.20.150
- Closing plate | RH.20.151
- Roller | RH.20.152
- Plate | RH.20.153
- Plate | RH.20.154
- Grooved pin | RH.20.155
- Sleeve bearing | RH.20.157
- Special bolt | RH.20.158
- Bush | RH.20.163
- Synth. chain guide | RH.20.164
- Synth guide | RH.20.166
- Synthetic guide | RH.20.168
- Support | RH.20.169
- Arm | RH.20.170
- Tooth | RH.20.172
- Curve | RH.20.173
- Carrier roller chain | RH.20.175
- Washer | RH.20.189
- Sealing ring | 1003.0000.0078
- Locking mechanism PDS-side | RH.20.501
- Carrier | RH.20.503
- Compression spring | VE.DR.021
- Pressure spring | VE.DR.077
- Pressure spring | VE.DR.082
- Pressure spring L=25mm | VE.DR.083
- Pressure spring | VE.DR.092
- Pressure spring | VE.DR.102
- Torsion spring | VE.TO.046
- Valve | EC.20.023
- Air cylinder | 1007.0000.3280
- Bearing for support roller | 1002.0000.0011
- Spherical roller bearing 22209 | 1002.0000.0024
- Seal 40/62x7 | 1003.0000.0053
- S.S. tap bolt M8x30 | 1001.0933.0830
- S.S. countersunk headscrew M6x12 | 1001.7991.0612
- S.S. countersunk headscrew M6x20 | 1001.7991.0620
- Bearing bushing | LBC15/19x20
- Bearing bushing | LBC50/60x50
- Eviscerator
- Synthetic tray, grey 6" | PC.10.002
- Mounting pin for tray | PC.10.001
- Ball bearing special 6202 2RS | 1002.0000.SS22
- S.S. bushing D=20/17 L=10,9 | MA.10.001
- S.S. shaft L=57mm | MA.10.002
- Bronze roller L=42,5mm | MA.10.003
- Bronze roller | MA.10.004
- S.S. bushing D=16 L=9 | MA.10.005
- Synth. upper block | MA.10.006
- Upper block with 1 mounting hole | MA.10.006A
- Gear wheel | MA.10.007
- Gear rack set (2 pcs.) | MA.10.008
- Bronze wearing plate | MA.10.009
- Synth. valve | MA.10.010
- Synth. valve new type | MA.10.030
- Roller, special 6202 | MA.10.011
- S.S. shaft, L=116 D=15 | MA.10.012
- Synth. lower block | MA.10.013
- Slide bush | MA.10.014
- S.S. back support roller external ring | MA.10.017
- S.S. sliding block | MA.10.018
- Fork block | MA.10.027
- Bushing L=94 | MA.10.029
- S.S. bushing | MA.10.033
- Synth. sliding block | MA.10.038
- Spring lever | MA.10.040
- Threaded plug | MA.10.043
- Upper block | MA.10.044
- S.S. hexagon plug | MA.10.045
- Brass ring | IM.10.009
- High pressure pump | MA.10.501
- Lower pack unit complete | MA.10.503
- Lower pack unit complete N.T. | MA.10.503A
- Eviscerating spoon (small bird) | MA.10.504
- Eviscerating spoon (big bird) | MA.10.504A
- Hinge block complete | MA.10.505
- Upper block complete | MA.10.507
- Sliding block compl. | MA.10.508
- Eviscerator unit complete | MA.10.509
- Seal 90/110x12 | 1003.0000.0017
- Seal 50/75x10 | 1003.0000.0023
- Seal 100/140x12 | 1003.0000.0024
- Seal 145/165x13 | 1003.0000.0049
- Circlip bore 165 st | 1005.0472.0165
- Compression spring VM621 | VE.DR.019
- Synthetic tray, green 6" | PC.10.004
- Synthetic tray, grey 8" | PC.10.005
- Synthetic tray, red 6" | PC.10.007
- Synthetic tray, blue 6" | PC.10.008
- Chain 50,8 S.S.with synth. rollers | TR.HB.001
- Chain 50,8 S.S. with s.s. rollers | TR.HB.003
- S.S. eviscerating spoon | EV.10.002
- Synth. roller L=68mm | EV.10.003
- Synth. cam follow roller | EV.10.004
- Synth. roller L=55 | EV.10.005
- Connection rod | EV.10.007
- Plunger rod | EV.10.008
- Upper slide block | EV.10.009
- Slide block | EV.10.010
- Brass shaft L=68mm | EV.10.013
- Centring chuck | EV.10.016
- Shaft L=479mm | SA.10.012
- S.S. coupling | EV.10.501
- Evisceration rod | EV.10.502
- Eviscerating unit | EV.10.506
- Centring unit | EV.10.507
- Complete unit with chuck | EV.10.512
- Guide adjustment 135xM12 | EV.10.519
- Manual eviscerating spoon | EV.MA.500
- Compr. spring VM633 | VE.DR.045
- Collar bearing bushing 12x15 L=9 | EV.20.001
- Synth. collar bearing bushing 18x6 L=12 | EV.20.002
- S.S. adjusting ring | EV.20.003
- S.S. curve roller | EV.20.005
- S.S. shaft L=50mm | EV.20.006
- Brass ring 18x10,5x1 | EV.20.007
- Synth. ring 20x12x1 | EV.20.008
- S.S. shaft L=82mm | EV.20.009
- S.S. intermediate bushing | EV.20.010
- Strip L=690mm | EV.20.013
- S.S. shaft L=35mm | EV.20.015
- S.S. shaft L=21mm | EV.20.016
- Brass ring 18/10x1 | EV.20.017
- Curve roll | EV.20.018
- S.S. shaft L=68,9mm | EV.20.019
- S.S. ratchet | EV.20.020
- S.S. ring D9x22x5 | EV.20.026
- S.S. ring D6,5x22x5 | EV.20.027
- S.S. pin | EV.20.028
- Strip L=755 PGI | EV.20.029
- Synth. ring | EV.20.030
- Flanged bearing bush | EV.20.031
- Carrier Plate | EV.20.032
- Special Roll | EV.20.033
- Flanged Bearing bush | EV.20.034
- Flanged bearing bush | EV.20.035
- Guide block | EV.20.036
- Roll | EV.20.037
- S.S. shaft | EV.20.038
- Bearing Bush | EV.20.039
- Shaft | EV.20.040
- Cam plate (straight) | EV.20.041
- Cam plate (curved) | EV.20.042
- Fastening plate | EV.20.050
- Flange boss | EV.20.051
- Synth. special ring | EV.20.052
- Flanged bearing bush | EV.20.053
- Flanged bearing bush | EV.20.054
- Lever | EV.20.055
- Synth. finger | EV.20.056
- Arm | EV.20.060
- Connecting rod | EV.20.061
- Plate | EV.20.062
- Shaft | EV.20.063
- Bush | EV.20.064
- Bush | EV.20.065
- Special key | EV.20.066
- Bearing bush | EV.20.067
- Flanged bearing bush | EV.20.068
- Flanged bearing bush | EV.20.069
- Synth. block | EV.20.070
- Curve roll | EV.20.071
- Special plug | EV.20.072
- Shaft | EV.20.073
- Bearing sleeve | EV.20.082
- Bracket | EV.20.502
- Complete eviscerating arm Nuova | EV.20.504
- Intermediate shaft | SA.20.005
- Compression spring | VE.DR.088
- Bearing | 1002.0000.SD84
- Ball bearing 6201 2RS SS | 1002.0000.SS12
- Collar bearing bushing | LBK12/17x16
- Long lifter | EV.40.003
- Shaft for torsion spring | EV.40.009
- Shaft for cam roller | EV.40.010
- Manual hydraulic pump | EV.40.019
- Special washer | EV.40.034
- Belt 12.5x1925 | EV.40.040
- Arm for unit | EV.40.041
- Lifter for shaft 22mm | EV.40.042
- Long lifter incl. bushings | EV.40.045
- Short lifter incl. bushings | EV.40.046
- Cam wheel with ball bearing 50x25 | EV.40.049
- Cam wheel for needle | EV.40.051
- Brass spindle M20X278 | EV.40.057
- Torsion spring CCW d=3 D=19 | VE.TO.018
- Torsion spring CW d=3 D=19 | VE.TO.019
- Bearing bushing | LBC.PAP.1515
- Ventcutter
- Cutting unit, complete type 0595 | VC.10.501
- Lower unit complete | VC.10.502
- Vent blade D=25mm L=61mm RH | VC.10.001
- Clamp bushing D=24,2 L=43 | VC.10.039
- Synth. slide block | VC.10.010
- Vent blade D=25mm L=61mm LH | VC.10.002
- S.S. worm shaft L=438,6mm | VC.10.008
- Bronze bearing sleeve type I | VC.10.015
- S.S. worm shaft type I L=467mm | VC.10.026
- Gear wheel Z=16 M3 type II | VC.10.027
- S.S. stop block type I | VC.10.028
- S.S. washer 40x25x2,5 type II | VC.10.029
- S.S. vent auger for knife LH+RH | VC.10.030
- Vent blade D=22,2 L=61mm LH | VC.10.032
- Vent blade D=22,2 L=61mm RH | VC.10.033
- Guide bearing block | VC.10.034
- S.S. locking plate | VC.10.036
- S.S. auger shaft L=274,50mm | VC.10.014
- Scraper ring | VC.10.045
- Clamping block cut in 4 | VC.10.047
- S.S. vent auger for blade D=25 | VC.10.048
- S.S. vent bushing ring | VC.10.051
- O-Ring | VC.10.052
- Tail unit, incl. roll | VC.10.053
- Bronze gear wheel Z=16 | VC.10.054
- Tail unit incl. roll | VC.10.059
- Shaft for tail unit | VC.10.060
- Synth. roller for the tail unit | VC.10.061
- Centring bracket RH | VC.10.063
- Centring bracket LH | VC.10.063L
- S.S. worm shaft L=390 | VC.10.064
- S.S. bushing | VC.10.065
- Synth. upper slide block | VC.10.066
- S.S. upper block lower unit | VC.10.067
- Lower block | VC.10.068
- Upper block | VC.10.083
- Fastening block | VC.10.084
- S.S. ring | VC.10.087
- Draw spring VM329 | VE.TR.015
- S.S. intermediate shaft L=434mm | SA.10.011
- S.S. intermediate shaft L=330mm | SA.10.014
- Star knob | PK.10.004
- Synth. large protecting cover | PK.10.010
- Compression spring D180-07 | VE.DR.014
- S.S. ball bearing 6203 2RS | 1002.0000.SS13
- Vent blade D=25mm RH 4 slots | VC.20.001
- Vent blade D=25mm LH 4 slots | VC.20.002
- Vent blade D=25 RH 5 slots | VC.20.003
- Vent blade D=25 LH 5 slots | VC.20.004
- Arm | VC.20.005
- Vent blade D=25mm LH 4 slots | VC.20.010
- Vent blade D=25mm LH 6 slots | VC.20.010B
- Vent blade D=25mm RH 4 slots | VC.20.011
- Vent blade D=25mm RH 6 slots | VC.20.011B
- S.S. adjusting ring | VC.20.013
- Vent blade 48mm (L=120xD=51mm) | VC.20.015
- Curve plate | VC.20.016
- Curve plate | VC.20.017
- Synth. curve roller | VC.20.020
- S.S. pin D=10, L=46mm | VC.20.021
- S.S. pin D=8, L=24mm | VC.20.022
- Synth. ring 30x16,1x1mm | VC.20.023
- Synth. bush | VC.20.028
- Synth. bearing block | VC.20.029
- S.S. pin D=16 L=69mm | VC.20.031
- Synth. collar bearing bushing | VC.20.032
- S.S. bush D=32,5mm | VC.20.033
- S.S. bush D=32,5mm | VC.20.034
- O-Ring | VC.20.035
- S.S. ring D=24mm | VC.20.036
- Special roller D=25mm | VC.20.038
- Special rod L=26mm | VC.20.039
- S.S. ring D=16mm | VC.20.040
- Curve plate | VC.20.042
- Curve plate | VC.20.044
- Curve plate | VC.20.045
- Curve plate | VC.20.046
- Curve plate | VC.20.047
- Special pin | VC.20.048
- Special bearing bush | VC.20.051
- S.S. shaft | VC.20.052
- Hollow shaft LH | VC.20.054
- Steel block | VC.20.056
- Collar bearing bushing | VC.20.057
- Gear wheel Z=19 | VC.20.058
- S.S. shaft D=14x30mm | VC.20.059
- S.S. shaft D=14x25mm | VC.20.060
- S.S. pin | VC.20.062
- Vent blade D=25mm RH 6 slots | VC.20.065
- Vent blade D=25mm LH 6 slots | VC.20.066
- Pin, hammer | VC.20.069
- S.S. washer | VC.20.070
- Frame | VC.20.071
- Bearing block | VC.20.072
- Tail bracket | VC.20.074
- Vent pin | VC.20.075
- Bracket | VC.20.076
- Plate | VC.20.077
- Synth. gear wheel VC16/VC20 | VC.20.078
- O-ring | VC.20.079
- Fastening plate | VC.20.081
- Ring | VC.20.082
- Plate | VC.20.083
- Special bush | VC.20.084
- Synthetic bushing | VC.20.085
- Synthetic roll | VC.20.086
- Clips | VC.20.087
- Clamp | VC.20.088
- Bush | VC.20.089
- Bearing block assy "lower" | VC.20.504
- Gear Z=6 | VC.20.504A
- Compression spring | VE.DR.081
- Compression spring | VE.DR.089
- Ball bearing 6201 2RS SS | 1002.0000.SD12
- Pressure spring L=500 | VE.DR.024
- Vent blade 26x30x15mm | VC.30.001
- Vent blade 34x38x20mm | VC.30.003
- Vent blade D=25 bayonette | VC.40.003
- Bearing bush 12x15x32 | VC.40.005
- Vacuum tube lower | VC.40.012
- Synth. drive bush | VC.40.014
- Spacer | VC.40.018
- Blade holder | VC.40.019
- Synth. gear wheel Z=24 | VC.40.021
- Synth. gear wheel Z=65 | VC.40.022
- Synth. gear wheel Z=27 | VC.40.023
- Tube blade holder S.S. | VC.40.024
- Disc | VC.40.030
- Unit gear wheel Lh | VC.40.031
- Gear wheel nylon LH | VC.40.032
- Locknut L thread | VC.40.033
- Shaft L.H. thread | VC.40.034
- L.H. nut | VC.40.035
- Vacuum tube for big birds | VC.40.037
- O-ring | VC.40.041
- Vacuum tube bush | VC.40.043
- Bush | VC.40.056
- Cam wheel | VC.40.061
- Nut for tube bladeholder | VC.40.062
- Gliding rods with upper plate | VC.40.069
- Gliding rods with bottom plate | VC.40.070
- Unit bushing | VC.40.078
- Tail roller small | VC.40.082
- Belt 12,5x1925mm | VC.40.083
- Synth. curve roller | VC.40.089
- Synth. spacer ring | VC.40.090
- Synth. bush | VC.40.092
- Top gliding block | VC.40.103
- Bush for block | VC.40.104
- Distance bush | VC.40.105
- Bearing bush for bore block | VC.40.106
- Guidance bush | VC.40.107
- Drive shaft RH for cutting block | VC.40.108
- R.H. nut | VC.40.109
- Spring holder pin | VC.40.110
- Upper vacuum tube | VC.40.111
- Shaft D12x244 | VC.40.112
- Synth. gear wheel | VC.40.113
- Synthetic curve | VC.40.114
- S.S. shaft | VC.40.115
- Clamp bush for bearing H209 | VC.40.125
- Unit gear wheel Rh | VC.40.126
- Pulley with stud | VC.40.127
- Bearing Ø50mm | VC.40.131
- Shim D=60mm | VC.40.132
- Winged bolt | VC.40.133
- Drive shaft LH for cutting block | VC.40.135
- Shaft R.H. thread | VC.40.136
- Spacer | VC.40.141
- Blade drive wheel Mk2 | VC.40.501
- Synth. ball bearing 6005 | 1002.0000.KU03
- Compr.spring | VE.DR.L04
- Compr. spring L=94 | VE.DR.L08
- S.S. compr. spring | VE.DR.L09
- Compr. spring L=260mm | VE.DR.062
- Compr. spring L=300mm | VE.DR.063
- Ventblade D=24mm L=63mm | VC.50.001
- S.S. circlip | 1005.0471.SS25
- Bearing bushing | LB.DU.007
- Equipment
- Manual vent cutter | VC.MA.500N
- Picking finger puller | PV.TR.500
- Picking finger cutter | PV.KN.500
- Manual lung remover pistol 1" incl. balancer | FC.MA.501
- Packing horn Model 1 D=210 | VP.TR.210
- Neck and hock cutter | CU.TK.500
- Neck and hock cutter type BAK-H | CU.BAK.500
- S.S. glove 5 fingers L/R | GL.S5.SLR
- Sterilizer for knives | MS.00.001
- Circular blade sharpener | CM.GR.501
- Vent blade sharpener | VC.GR.500
- Screw water chiller 860x3000mm | SC.00.501
- Emergency stop | EC.10.002
- Winch 500 kg. for 6mm. S.S. cable | 1300.4585.0001
- Stunner high frequency | VD.00.501
- Stunner for turkey 400/hour | VD.50.500
- Manual lung remover pistol 1" w/o accessoires | FC.MA.502B
- Ergo step | ST.00.503
- Gripper set for finger puller | PV.TR.501A
- Spring for finger puller | PV.TR.503
- Tube for finger puller | PV.TR.504
- Connector shaft to gripper | PV.TR.505
- Air valve | PV.TR.518
- Blade for picking finger cutter | PV.KN.001
- Anvil for picking finger cutter | PV.KN.005
- Set of bars | PV.KN.017
- Triangle holder | PV.KN.018
- Vent blade D=25mm | VC.MA.003
- Vent blade D=30mm | VC.MA.002
- Vent blade D=35mm | VC.MA.001
- Vent blade D=40 mm | VC.MA.004
- Vent blade D=60 mm | VC.MA.005
- Seal | VC.MA.009
- S.S. slide valve | VC.MA.013
- Alu. main block | VC.MA.015
- Knife holder and pin | VC.MA.016
- Valve | VC.MA.018
- Hose nipple | VC.MA.020
- Shaft – recessed | VC.MA.027
- S.S. lever | VC.MA.028
- Nipple for hose 1/2" | VC.MA.035
- Spring | CU.TK.001
- Trigger assembly | CU.TK.007
- Blades, set | CU.TK.008
- Auto exhaust valve assy | CU.TK.009
- Exhaust silencer | CU.TK.016
- Piston rod | CU.TK.025
- Balance ring 4,5 kg. | CU.TK.026
- Exhaust O-ring | CU.TK.027
- Cylinder | CU.TK.034
- Piston | CU.TK.035
- Spring for piston for BAK-H | CU.BAK.010
- Set of blades for BAK-H | CU.BAK.017
- Frequency control FC302 IP20 | EC.10.027
- Inverter 1,5kW/FC302 | EC.10.028
- Incremental Encoder | EC.10.029
- Photo-electric sensor | EC.10.042
- Inverter 0,37kW/FC302 | EC.10.043
- Inverter 4,0kW/FC302 | EC.10.044
- Switch safety/cable | EC.10.067
- Thermostat for the sterilizer | MS.00.003
- Heating element for sterilizer | MS.00.004
- Grinding stone 150x10x25 | CM.GR.002
- Motorshaft (blade-arm) | CM.GR.008
- Intermediate shaft (knife-arm) | CM.GR.009
- Bladeshaft (knife-arm) | CM.GR.010
- Grinding stone 20x10x6 | VC.GR.003
- Spacer | CM.GR.018
- Grinding stone type 11V9 | GR.20.001
- Filleting machine
- Product carrier | RP.10.001
- Maltese cross | RP.10.002
- Carrier symmetric | RP.10.003
- Hinge plate | RP.10.006
- Synth. knife slide block | RP.10.011
- Synth. knife slide block | RP.10.012
- Roller D120 | RP.10.013
- Support roller D80 | RP.10.014
- Shaft | RP.10.016
- Carrier block | RP.10.017
- Hook | RP.10.019
- Wheel arbor bearing | RP.10.020
- Nut | RP.10.021
- Connection plate | RP.10.023
- Locking pin | RP.10.024
- S.S. shaft L=28,3mm | RP.10.025
- Bearing roller | RP.10.026
- S.S. shaft L=23mm | RP.10.027
- Shaft | RP.10.028
- Mounting shaft | RP.10.029
- Plug | RP.10.030
- Bearing shaft | RP.10.031
- Pin for carrier | RP.10.032
- S.S. distance bush | RP.10.034
- Bearing axis | RP.10.035
- Stopper pawl | RP.10.036
- Synthetic ring | RP.10.038
- Ring | RP.10.039
- Buffer cone | RP.10.041
- Davel pin | RP.10.044
- Roll 25.8x7 | RP.10.045
- Rod head bolt M8 | RP.10.046
- Piston rod link | RP.10.047
- Trunion support | RP.10.051
- T-shaped guidebar | RP.10.052
- Sleeve bearing | RP.10.054
- Adjusting shaft | RP.10.056
- Sealing ring | RP.10.057
- Sleeve bearing with flange | RP.10.058
- Bearing bush | RP.10.059
- Sleeve bearing | RP.10.061
- Rod end push-pull bar | RP.10.504
- Peeling roller set (2 pcs.) | RP.10.505
- Carrier, base assembly| RP.10.508
- Roller lever valve | EC.10.031
- Roller lever valve | EC.10.032
- Gear belt 32T10/5000 Fda | 1004.32T10.5000
- Aircylinder DSNU.50-80 | 1007.DSNU.5080
- Cylinder CRDSNU-32-25 | 1007.CRDSNU.3225
- Compr. spring VM650 | VE.DR.046
- Compr.spring VM652 | VE.DR.049
- Compr. spring D308 | VE.DR.056
- Compression spring D212B | VE.DR.070
- Compression spring D195 | VE.DR.071
- Compression spring D234N | VE.DR.098
- Torsion spring VM649 | VE.TO.032
- Torsion spring VM695 | VE.TO.041
- Torsion spring VM681 | VE.TO.044
- Torsion spring VM682 | VE.TO.045
- Rod head M8x1,25 int. left | 1004.00BI.0820
- Round nut KM 12 | 1001.0981.0009
- Ball bearing 61903H-2RS SS | 1002.0000.SS72
- Bearing flange KLT 30-C | 1002.0000.0076
- Collar bearing bushing paf 10070 P11 | LBK.PAF.10070
- S.S. circlip shaft 17 | 1005.0471.SS17
- S.S. scraper L.H. | FL.20.002
- S.S. scraper R.H. | FL.20.003
- S.S. excenter | FL.20.004
- S.S. scraper top | FL.20.005
- S.S. scraper bottom | FL.20.006
- Synth. block | FL.20.007
- S.S. pin D=8 L=210 | FL.20.012
- Synth. plug | FL.20.013
- Cylindrical pin | FL.20.014
- O-ring | FL.20.015
- Shaft L=122mm | FL.20.018
- Pin | FL.20.019
- Synth. plug | FL.20.020
- Synth. special plug | FL.20.021
- Slip-on knife | FL.20.022
- Special rod | FL.20.023
- Synth. track | FL.20.024
- Synth. track | FL.20.025
- Synth. block | FL.20.026
- Synth. block | FL.20.027
- Synth. block | FL.20.028
- Synth. block | FL.20.029
- Synth. curve strip | FL.20.030
- Synth. special strip | FL.20.031
- Synth. special strip | FL.20.032
- Synth. special strip | FL.20.033
- Synth. block for scraper | FL.20.034
- Synth. plate for scraper | FL.20.035
- Synth. shaft | FL.20.036
- Synth. block | FL.20.037
- Lock shaft | FL.20.038
- Shaft | FL.20.039
- Ball rod head | FL.20.040
- Synthetic block | FL.20.041
- Synthetic block | FL.20.042
- Special plug | FL.20.043
- S.S. roll | FL.20.044
- Special strip | FL.20.045
- Special sprocket | FL.20.046
- Special sprocket | FL.20.047
- Synth. block | FL.20.048
- Special roll | FL.20.049
- S.S. plug | FL.20.050
- Shaft | FL.20.051
- Block wishbone | FL.20.052
- Shaft | FL.20.053
- Fork | FL.20.055
- Arm | FL.20.056
- Special curve | FL.20.058
- Synth. block | FL.20.060
- Plate | FL.20.061
- Guide block | FL.20.062
- Shaft | FL.20.063
- Shaft | FL.20.064
- Block | FL.20.065
- Synth. block | FL.20.066
- Arm | FL.20.067
- Shaft | FL.20.068
- Flange | FL.20.069
- Peelerroller left | FL.20.070
- Synth. shaft | FL.20.071
- Flange | FL.20.073
- S.s. ring | FL.20.074
- Bush | FL.20.075
- Shaft | FL.20.076
- Alu. block | FL.20.077
- Bush | FL.20.078
- Shaft | FL.20.079
- Shaft | FL.20.080
- Scraper left | FL.20.081
- Scraper right | FL.20.082
- Scraper ring | FL.20.083
- Shaft | FL.20.084
- Hub | FL.20.085
- Block | FL.20.086
- Block | FL.20.087
- Arm | FL.20.088
- Block | FL.20.089
- Shaft | FL.20.090
- Synth. block | FL.20.091
- Support | FL.20.092
- Plate | FL.20.093
- Special plate | FL.20.094
- Housing | FL.20.095
- Inside hub | FL.20.096
- Bush | FL.20.097
- Special roller chain | FL.20.098
- Guide | FL.20.099
- Special strip | FL.20.100
- Bend | FL.20.101
- Metal guide rail | FL.20.102
- Bearing bush | FL.20.104
- Block | FL.20.105
- Plate | FL.20.115
- Guide | FL.20.122
- Presser | FL.20.123
- Sprocket disc | FL.20.124
- Plate | FL.20.129
- Plate | FL.20.137
- Shaft | FL.20.139
- Adjusting screw | FL.20.140
- Plate | FL.20.141
- Pin | FL.20.142
- Ring | FL.20.143
- Ring | FL.20.144
- Cylindrical pin | FL.20.145
- Shaft | FL.20.146
- Bush | FL.20.147
- Block | FL.20.148
- Ring | FL.20.149
- Ring | FL.20.150
- Block | FL.20.151
- Bush | FL.20.152
- Ring | FL.20.153
- Press-on knife | FL.20.154
- Shaft | FL.20.155
- Bush | FL.20.156
- Coupling | FL.20.157
- Bush | FL.20.159
- Disc sprocket | FL.20.160
- Triplex coupler link | FL.20.161
- Duplex coupler link | FL.20.162
- Duplex roller chain (17 links) | FL.20.163
- Single roller chain (115 links) | FL.20.164
- Single coupler link | FL.20.165
- Synth. guide block | FL.20.176
- Bush | FL.20.179
- Fork | FL.20.180
- Sprocket | FL.20.181
- Gear wheel | FL.20.182
- Special shaft | FL.20.183
- Sprocket | FL.20.184
- Double sprocket | FL.20.185
- Shaft | FL.20.186
- Shaft | FL.20.187
- Carrier roller chain | FL.20.188
- Bushing | FL.20.191
- Bush | FL.20.192
- Fork | FL.20.193
- Knife holder (above) | FL.20.194
- Knife holder (below) | FL.20.195
- Strip | FL.20.196
- Shaft | FL.20.197
- Plate | FL.20.198
- Ball | FL.20.199
- Curve roll incl. flanged bearing bushings | FL.20.502
- Coupling complete | FL.20.504
- Chain roller special | FL.20.505
- Single coupler link | KE.RS12B1.SLT
- Air cylinder | 1007.DSBF.50125
- Scraper ring | 1003.RS00.0001
- Pressure spring | VE.DR.074
- Pressure spring | VE.DR.075
- Pressure spring | VE.DR.076
- Compression spring | VE.DR.087
- Pressure spring | VE.DR.096
- S.S. ball | 1002.0000.4000
- Boning cone | FL.10.007
- S.S. connecting link 50,8 | TR.HB.002
- S.S. ball bearing 6009 2RS | 1002.0000.SS39
- Bearing flange KLT 20-CS VA | 1002.0000.0075
- St circlip | 1005.0471.0006
- S.S. circlip | 1005.0472.SS32
- S.S. circlip | 1005.0471.SS40
- S.S. circlip | 1005.0472.SS42
- Shaft for turning block | FL.30.026
- Cone turn wheel | FL.30.027
- Blades & knives
- Circular blades
- 175x22,2x2 DB 75 widia inserts | CB.175.22.002
- 110x32x2mm DB | CB.110.32.002
- 160x32x2mm widea inserts | CB.160.32.006
- 175x25/30x2mm SB 24 notches | CB.175.25.008
- 100x22,2x2mm SB | CB.100.22.001
- 300x25/30x2 SB microteeth | CB.300.25.007
- 230x32x2mm DB | CB.230.32.001
- 200x32x2mm DB | CB.200.32.004
- 250x25/30x2mm SB 4 slots | CB.250.25.003
- 175x25/30x2 SB 4 slots 18,8x4mm | CB.175.25.003
- 250x32x2,5mm SB 1 hole | CB.250.32.002
- 200x32x2mm SB 1 hole | CB.200.32.001
- 200x30/25x2mm SB MT 2 holes | CB.200.25.010
- 250x32x2,5 DB 1 hole | CB.250.32.003
- 175x25/30x2mm SB 4 slots 2 holes | CB.175.25.002
- 110x32x2mm SB | CB.110.32.001
- Dish blade 250x54x17 | CB.250.54.001
- 175x32x2mm SB | CB.175.32.003
- 110x25/30x2 widia inserts | CB.110.25.005
- 175x32x2mm DB 1 hole | CB.175.32.002
- 280x32x2,5mm DB | CB.280.32.002
- 200x32x3mm DB | CB.200.32.006
- 200x22x3mm SB 22 notches 6 holes | CB.200.22.004
- 200x32x2mm DB 1 hole | CB.200.32.004H
- 110x25/30x2 SB MT | CB.110.25.004
- 250x25/30x2mm SB 4 slots | CB.250.25.006
- 100x10x2mm DB | CB.100.10.001
- 90x20x2mm DB | CB.090.20.001
- 110x32x2 SB microteeth | CB.110.32.004
- 125x32x2 DB | CB.125.32.002
- 125x25/30x2mm SB | CB.125.25.004
- 110x25/30x2 SB 12 slots 2x7mm | CB.110.25.006
- 110x25/30x2mm SB | CB.110.25.001
- 110x25/30x2mm SB 4 slots | CB.110.25.002
- 175x32x2mm SB 6 slots 1 hole | CB.175.32.001
- 80x25/30x2mm SB | CB.080.25.001
- 125x22x2mm SB | CB.125.22.003
- 120x22x2mm SB | CB.120.22.001
- 180x22x2mm SB | CB.180.22.001
- 230x32x2mm DB 50 slots | CB.230.32.002
- 200x25/30x2mm DB 24 slots | CB.200.25.003
- 170x32x2mm DB 1 hole | CB.170.32.001
- 175x25/30x2mm SB 8 slots | CB.175.25.004
- 165x25/30x2mm DB 4 slots | CB.165.25.002
- 270x40x3 DB 44 notches | CB.270.40.003
- 160x25/30x2mm DB | CB.160.25.001
- 160x32x2mm DB 6 slots | CB.160.32.002
- 150x25/30x2mm DB | CB.150.25.004
- 250x25/30x2mm DB 2 holes | CB.250.25.002
- 60x22x2mm SB | CB.060.22.001
- 150x32x2mm DB | CB.150.32.001
- 150x22,2x1,5mm SB | CB.150.22.002
- 180x32x2mm SB 6 slots | CB.180.32.002
- 200x32x2mm SB 6 slots | CB.200.32.007
- 180x32x2mm SB 6 slots | CB.180.32.003
- 210x32x2mm SB | CB.210.32.001
- 200x22x3mm SB | CB.200.22.002
- 178x22,2x1,5 DB | CB.178.22.002
- 230x32x2mm DB 4 slots | CB.230.32.004
- 175x25/30x2mm SB | CB.175.25.001
- 350x25/30x3mm DB 2 holes | CB.350.25.001
- 350x32x2mm DB 4 slots | CB.350.32.005
- 350x32x2,5mm SB | CB.350.32.006
- 350x32x3mm DB | CB.350.32.001
- 178x25/30x2mm SB 6 slots | CB.178.25.001
- 300x25/30x3mm DB 4 holes | CB.300.25.003
- 200x25/30x2mm SB | CB.200.25.004
- 270x40x3mm DB | CB.270.40.002
- 270x40x3mm DB SE | CB.270.40.004
- 310x40x3 DB | CB.310.40.001
- 330x40x3 DB | CB.330.40.001
- 10x25/30x2 DB 4 slots | CB.100.25.003
- 295x32x3mm DB | CB.295.32.002
- 178x22x2mm DB 40 notches | CB.178.22.006
- 250x25/30x2,5mm SB 4 holes | CB.250.25.005
- 280x32x3 SB 24 notches | CB.280.32.003
- 430x32x2,5mm DB 12 slots | CB.430.32.001
- 250x32x2mm DB | CB.250.32.008
- 300x25/30x3mm DB 40 notches | CB.300.25.004
- 250x30/25x2mm SB MT 2 holes | CB.250.25.009
- 250x25/30x2mm SB 2 holes | CB.250.25.001
- 270x40x3mm SB | CB.270.40.005
- 100x20x1mm SB 4 holes | CB.100.20.001
- 75x15x1mm DB | CB.075.15.001
- 300x32x2,5mm DB | CB.300.32.004
- 400x32x2,5mm DB 1 hole | CB.400.32.001
- 400x32x4mm SB 1 hole | CB.400.32.002
- 400x32x4mm DB 1 hole | CB.400.32.003
- 185x22x2mm DB | CB.185.22.001
- 230x32x2mm SB | CB.230.32.003
- 185x32x2mm DB | CB.185.32.001
- 200x30x2mm SB 48 toothed | CB.200.30.001
- 200x25/30x2 SB 4 slots 2 holes | CB.200.25.008
- 185x32x2mm SB 6 slots | CB.185.32.002
- 200x20x1,5mm SB 4 holes | CB.200.20.004
- 250x61x2mm SB 2 holes | CB.250.61.001
- 200x25x2mm SB 6 holes | CB.200.25.005
- 240x32x3mm DB 1 hole | CB.240.32.002
- 220x40x2mm SB serrated | CB.220.40.001
- Straight blades
- Leg deboner knife „J-Cut“ | VM.020
- Wishbone knife LH | VM.021
- Wishbone knife RH | VM.022
- Arrow knife | VM.023
- Toothed straight knife | VM.024
- Oval shape straight knife L.H. | VM.025
- Oval shape straight knife R.H. | VM.026
- Flat knife Wingcutter | VM.028
- Flat knife Wingcutter | VM.029
- V-shape knife Tail cutter | VM.030
- Special knife Stork wing cutter right | VM.031
- Special knife Stork Wingcutter left | VM.032
- Oval shape knife right | VM.033
- Oval shape knife left | VM.034
- Flat knife 04 | VM.036
- Flat knife left DB | VM.048
- Flat knife right DB | VM.049
- Wishbone knife LH | VM.050
- Wishbone knife RH | VM.051
- Opener blade Meyn concave (old style) | VM.052
- Skincutter blade | VM.053
- Arrow knife filleting mach. | VM.055
- Flat knife filleting machine | VM.058
- Flat knife 59x16x3,3 DB | VM.065
- Flat knife 129/36/30x4 LH | VM.067
- Flat knife 129/36/30x4 RH | VM.068
- Flat knife DB | VM.071
- Flat knife filleting machine | VM.074
- Flat knife opener, toothed | VM.076
- Arrow knife filleting mach. | VM.079
- Toothed flat knife R.H. | VM.080
- Toothed flat knife L.H. | VM.081
- Filleting knife | VM.086
- Leg knife 89x16x3mm | VM.087
- Half moon blade | VM.089
- Opener blade | VM.090
- Opener & backstripcutter blade type II | VM.092
- Flat knife filleting machine DB | VM.096
- Pre-cutter blade wingtip cutter | VM.100
- Skate blade | VM.105
- Pre cutting knife | VM.112
- Arrow shaped blade | VM.116
- Side knife left | VM.117
- Side knife right | VM.118
- Blade LH thigh deboner | VM.121
- Blade RH thigh deboner | VM.122
- Wishbone knife LH | VM.126
- Wishbone knife RH | VM.127
- Groin knife | VM.128
- Flat blade RH | VM.129
- Insert blade Lico Swiss E130 | VM.130
- Flat blade LH | VM.131
- S.S. blade L50x25,2x2mm | VM.132
- S.S. blade 103.5x22.7x2 | VM.133
- Thighknife set (L+R) type 1 | VM.501
- Thighknife type II, precutter knife | VM.502
- Knife LH Leg processor | LP.40.001
- Knife RH Leg processor | LP.40.002
- Circular blades
- Container parts
- Sliding roof panel with SS strip | CS.20.016
- Floor panel 4L version | CS.20.020
- Floor panel | CS.20.012
- Pur closing plate | CS.20.001
- Pur closing plate blue bended | CS.20.001D
- Inner side panel | CS.20.010
- Floor panel 5L version | CS.20.015
- S.S. bracket | CS.20.003
- Side panel short | CS.20.014
- Side panel | CS.20.013
- Alu. plate incl. mounted hinges | CS.20.018
- S.S. hinge | CS.20.017
- Bracket S.S. | CS.20.021
- Alu. plate excl. mounted hinges | CS.20.019
- Synth. bush | CS.20.008
- Bushing | CS.20.023
- Synth. block | CS.20.005
- Special plate S.S. | CS.20.022
- S.S. pin short | CS.20.011S4
- S.S. pin long | CS.20.011L4
- Sprocket | CS.20.024
- Single sprocket | CS.20.025
- Brushes
- Brush L=126 B=43 D=3,4mm | BORST.027
- Brush D=250 L=150 D=2,5 bore=20 | BORST.007
- Unloader brush L=139 | BORST.001
- Brush L=115 B=36 H=19 D=2,8 | BORST.018
- Brush D=250 L=1200 D=1,5 | BORST.003
- Brush D=260 L=170 D=2,3 | BORST.005
- Brush with yellow pins interrupted | BORST.013
- Brush D=260 L=255 D=1,5 bore 20 | BORST.014
- Brush D=320 L=240 dr=3mm | BORST.020
- Brush D=100 L=120 D=2,0 | BORST.006
- Brush D=300 L=250 D=130/100 dr=3 | BORST.025
- Brush D=260 L=170 D=1,5 bore 20 | BORST.012
- Brush D=250 L=150 D=3 hole=25 | BORST.007A
- Brush D=300 L=220 dr=1,5 bore=25 | BORST.026
- Brush D=250 L=400 D=3 bore 35 | BORST.028
- Brush D=250 L=270 dr=3 core=60 bore 20 | BORST.029
- Brush D=250 L=350 D=2,5 bore=25 | BORST.034
- Brush D=250 L=250 D=1,5 bore=25 | BORST.016A
- Disc brush D=250 L=250 D=25 | BORST.017
- Brush D=250 L=270 D=20 | BORST.009
- Cut-up machine
- Bevel gearbox right for TM 90 | DM.10.502
- Bevel gearbox left for TM 90 | DM.10.503
- Bevel gearbox right for TM 100 | DM.10.504
- Bevel gearbox left for TM 100 | DM.10.505
- Set of gear wheels TM 90 LH+RH | DM.10.001
- Set of gear wheels TM 100 LH | DM.10.002
- Set of gear wheels TM 100 RH | DM.10.003
- S.S. shaft bevel gearbox LH thread | DM.10.004
- S.S. shaft bevel gearbox RH thread | DM.10.005
- S.S. clamping nut with LH thread | DM.10.006
- S.S. clamping nut with RH thread | DM.10.007
- S.S. knife holder bevel gearbox | DM.10.008
- Alu. bearing housing bevel gearbox | DM.10.009
- Alu. bevel gearbox | DM.10.010
- Gasket bevel gearbox | DM.10.024
- Gasket bevel gearbox | DM.10.025
- Cutting ring D=466 | DM.10.031
- S.S. plug 3/8" | DM.10.032
- Wing RH | DM.20.001
- Wing LH | DM.20.002
- Pur scraper plate | DM.20.004
- Toothed chain | DM.20.006
- Synth. block | DM.20.007
- Support | DM.20.008
- Block RH | DM.20.009
- Synth. block | DM.20.010
- Synth. block | DM.20.011
- Synth. strip | DM.20.012
- Gear wheel | DM.20.013
- Gear wheel | DM.20.014
- Bush | DM.20.015
- Support | DM.20.016
- Support | DM.20.017
- Sprocket | DM.20.018
- S.s. single sprocket | DM.20.019
- Sprocket | DM.20.020
- Special sprocket | DM.20.021
- Chain guide | DM.20.022
- Support | DM.20.023
- Shaft | DM.20.024
- Block LH | DM.20.025
- Block | DM.20.030
- Timing-belt pulley | DM.20.036
- Rod | DM.20.037
- Bush | DM.20.042
- Ring | DM.20.044
- Single sprocket plate | DM.20.045
- Cam piece | DM.20.050
- Cam piece | DM.20.051
- Plate | DM.20.052
- Shoulder screw | DM.20.053
- Bushing | DM.20.054
- Synth. block | DM.20.055
- Ring | DM.20.056
- Plug | DM.20.057
- Rod | DM.20.058
- Ring | DM.20.059
- Plate | DM.20.060
- Roller | DM.20.061
- Shaft | DM.20.062
- Ring | DM.20.063
- Shaft | DM.20.064
- Shaft | DM.20.065
- Strip | DM.20.066
- Plate | DM.20.067
- Plate | DM.20.068
- Shaft | DM.20.069
- Ring | DM.20.070
- Bushing | DM.20.071
- Guide | DM.20.072
- Ring | DM.20.073
- Special bush | DM.20.074
- Ring | DM.20.075
- Grease nipple extension | DM.20.076
- Guide | DM.20.077
- Curve roll | DM.20.078
- Gear wheel | DM.20.079
- Plate | DM.20.080
- Special sprocket | DM.20.081
- Synth. block | DM.20.083
- Geared belt | DM.20.086
- Special chain | DM.20.088
- Block | DM.20.090
- Block | DM.20.091
- Pressure spring | VE.DR.101
- Reversing roll | WT.20.002
- Timing belt pulley | WT.20.007
- Roll | WT.20.008
- Guide | WT.20.009
- Special shaft | WT.20.010
- Gear wheel | WT.20.011
- Flexible pin D=8 L=45mm | WT.20.012
- Retaining cover | WT.20.014
- Special shaft | WT.20.015
- Bronze spindle L=520mm | DM.30.002
- Gearbox | DM.30.003
- Disc 190-100/30.2x48 4xSL15 | DM.30.004
- Height adjustment unit | DM.30.501
- Blade shaft | DM.40.010
- Bushing for upper arm pivot | DM.40.026
- Ring D=25 | DM.30.001
- Unit upper fork RH | DM.40.027
- Unit upper fork LH | DM.40.028
- Flange D=50mm | DM.40.029
- Flange | DM.40.030
- Shim | DM.40.031
- Drive shaft | DM.40.035
- Spacer | DM.40.037
- Seal | DM.40.039
- Tensioner | DM.40.040
- Roller for tensioner | DM.40.041
- Washer | DM.40.043
- Belt 800-5M-15MM | DM.40.044
- V-belt polyflex 7M 950 | DM.40.055
- Flange | DM.40.060
- Alu. bearing block | DM.40.061
- Blade flange | DM.40.065
- Washer 30x12,2x5 | DM.40.070
- Flange | DM.40.074
- Tension spring | VE.TR.017
- Compr. spring | VE.DR.L11
- Compression spring d5,5 Dm19,25 | VE.DR.078
- S.S. circlip | 1005.0471.SS35
- S.S. circlip | 1005.0472.SS47
- S.S. circlip | 1005.0472.SS72
- Final inspection machine
- Slide unit complete | FC.10.501
- Connecting piece | FC.10.001
- Suction head | FC.10.002
- Sealing ring | FC.10.003
- Slide block | FC.10.008
- S.S. bended suction pipe | FC.10.012
- S.S. suction pipe | FC.10.013
- Vacuum unit complete | FC.10.502
- Brass lock | FC.10.016
- S.S. centring bracket | FC.10.015
- O-ring 319,3x5,7mm | FC.10.004
- S.S. slide block ECP | FC.10.023
- Compression spring D 132 B | VE.DR.039
- Compression spring D 326 A | VE.DR.053
- S.S. intermediate shaft L=425mm | SA.10.005
- Crank handle | PK.10.006
- Showerhead 1/2" | PK.10.007
- S.S. ball 8mm | 1002.0000.3000
- Collar bearing bushing 15x19 L=25 | LBK15/19x25
- Seal washer | 1003.0000.0011
- Bearing bushing 40x47x20mm | FC.40.001
- Bearing bushing | FC.40.002
- Bearing bushing 22/27x8mm | FC.40.003
- Piston for suction handle | FC.40.004
- Piston Rod | FC.40.005
- Washer Ø21,8 Bore:Ø7 thick:1mm | FC.40.006
- Trigger for suction handle | FC.40.007
- Locking lever | FC.40.012
- Stroke limiter | FC.40.015
- S.S. bearing bushing L=21 D=16mm | FC.20.001
- Synth. plug L=12,5 D=16,8mm | FC.20.002
- Synth. roll 31x16x13mm | FC.20.003
- Bearing bushing 16/12x13 | LBC12/16x13
- S.S. bush L=15 D=12mm | FC.20.005
- O-ring | FC.20.006
- Synth. bushing L=45 D=36,2mm | FC.20.007
- Synth. bushing L=55 D=36,2mm | FC.20.008
- Synth. roller 39x18x19mm | FC.20.009
- Special pipe | FC.20.011
- Roll | FC.20.012
- Synth. bushing L=55mm | FC.20.013
- Bushing | FC.20.014
- Special bolt | FC.20.015
- Guide block | FC.20.016
- Connection Bush | FC.20.017
- Flat jet spray nozzle | FC.20.018
- Bracket spreader | FC.20.019
- Curve ball bearing | 1002.0000.0091
- Steel circlip | 1005.0471.0070
- Opener
- Universal opener unit | OP.10.509
- Arm complete | OP.10.505
- Knife guide | OP.10.510
- Alu. slide block | OP.10.001
- Synth. roller L=62,5mm | OP.10.002
- S.S. shaft bolt | OP.10.004
- S.S. ring D=25mm | OP.10.005
- Knife holder, pivotable | OP.10.506
- Lock plate | OP.10.007
- S.S. upper block | OP.10.011
- Bearing bush 15x8 | OP.10.014
- Compression spring D288S | VE.DR.047
- Torsion spring VM147 | VE.TO.010
- Cylindrical pin L=47 | OP.20.001
- S.S. shaft L=86,5 | OP.20.002
- Roll hip lifter | OP.20.004
- Shaft | OP.20.006
- Compression spring L=64 | VE.DR.079
- Rubber sleeve V6-400 | PK.10.001
- Collar sleeve for carrier pin | PK.10.005
- Ball bearing 6202 2RS SS | 1002.0000.SS48
- Bearing bushing pap 2030 | LBC.PAP.2030
- Shaft for cutting arm | OP.40.004
- Blade with holder 26x30 | OP.40.014
- Stainless steel curved knife blade 5192N | OP.40.015
- Pur belt D=12x2765mm | OP.40.016
- Synth. guide plate | OP.40.017
- Bearing cover for shaft D=40 | OP.40.018
- Intermediate shaft L=395 | SA.40.006
- Inside out bird washer
- Complete unit | IO.10.502
- Aluminium slide block | IO.10.002
- S.S. water pipe 14 units | IO.10.003
- Brass coil sprayer | IO.10.004
- O-ring 53,3x5,3 | IO.10.007
- Hose 610mm | IO.10.008
- Spray segment 16 units | IO.10.010
- S.S. coil sprayer TF6FC-B6 | IO.10.011
- Connecting nipple 1/4" BSP | IO.10.013
- S.S. centring bracket | IO.10.014
- Hose L=750mm | IO.10.016
- S.S. intermediate shaft L=505mm | SA.10.007
- Hose connector | IO.40.004
- Bronze main shaft bushing D=50,8 | IO.40.005
- Bearing bush 50mm | IO.40.015
- Bearing bush | IO.40.028
- Distance bush | IO.40.033
- Nozzle support fitting nut | IO.40.036
- Red flat jet nozzle 3/8 diam. 5 | IO.40.038
- Blue nozzle flat jet 3/8 diam. 3 | IO.40.039
- Ball for nozzle support | IO.40.040
- Ball for nozzle support 1¼ | IO.40.041
- Hose d8xD15x350 | IO.40.061
- Washer nozzle | IO.40.063
- Shaft D15x33,5mm with collar | IO.40.065
- Nozzle with center pin | IO.40.503
- Neck breaker / Neck skin cutter
- Break unit complete | NB.10.501
- Curve unit | NB.10.502
- Break plate back complete | NB.10.505
- Break plate front complete | NB.10.506
- S.S. curve strip | NB.10.001
- Brass bearing bush D=45 L=53mm | NB.10.002
- Synth. shim | NB.10.003
- S.S. ring | NB.10.004
- S.S. slide block | NB.10.005
- Brass ring | NB.10.006
- S.S. slide block | NB.10.009
- S.S. clamping block | NB.10.010
- S.S. slide block | NB.10.011
- S.S. threaded pin | NB.10.013
- S.S. break plate front | NB.10.014
- S.S. break plate back | NB.10.015
- S.S. intermediate shaft L=675mm | SA.10.019
- Complete unit NCB N.T. | NC.10.505
- Roller L=50 D=40mm | NC.10.003
- S.S. spacer sleeve L=51mm | NC.10.004
- S.S. spacer sleeve L=71mm | NC.10.006
- Alu. slide block | NC.10.007
- S.S. spacer | NC.10.013
- Ball bearing 6014 2RS | 1002.0000.0006
- Synth. roll | NC.20.001
- Roll D=32 L=40 | NC.20.002
- Synth. roll | NC.20.003
- Frame | NC.20.005
- Intermediate shaft D=25 L=440 | SA.20.001
- Bearing bushing | LBC16/20x32
- Synth. roll | NS.20.001
- Synth. roll | NS.20.002
- S.S. bush L=44,8mm | NS.20.003
- Synth. bushing | NS.20.004
- Block | NS.20.005
- S.S. ring | NS.20.006
- Curv roller assy | NS.20.501
- Plug | NS.20.009
- Fluted pin | NS.20.010
- Fluted pin | NS.20.011
- S.S. circlip | 1005.0472.SS40
- Synth. bearing bushing 22,2x27x36 | NC.40.001
- S.S. shaft L=68 | NC.40.005
- S.S. shaft L=71 | NC.40.006
- Coupling half spidex | DM.40.038
- Seal washer | 1003.0000.0014
- Various machines
- Set of peeler shafts | HL.10.501
- Unloader belt L=2860x50mm | PA.40.001
- Unloader belt 2320x50mm | PA.40.002
- Gear wheel Z=30 | PA.40.006
- Synth. conveyor chain CC630D | TR.00.100
- Synth. conveyor chain CC631D | TR.00.101
- Synth. conveyor chain CC600D | TR.00.109
- Synth. conveyor chain CC600 | TR.00.110
- Conveyor chain for Gardan | TR.00.111
- Synth. conveyor chain CC1400 | TR.00.119
- Drive sprocket | TR.10.020
- Drive sprocket CC630D | TR.10.035
- Divisible sprocket CC600 | TR.08.035D
- Diaphragm pump 3" 1,1kW 1.000RPM | GP.10.500
- Diaphragm 3" | GP.10.001
- Diaphragm 4" | GP.10.002
- Suction head connector | GP.10.031
- Discharge head connector | GP.10.032
- Diaphragm 2" | GP.10.034
- Diaphragm axle 3" | GP.10.036
- Suction/discharge valve 3" | GP.10.003
- Suction/discharge valve 4" | GP.10.039
- Plug 3" PVC | GP.10.043
- Diaphragm axle 4" | GP.10.048
- Discharge head connector 4" | GP.10.053
- Discharge inlet | GP.10.054
- Loadcell 12 kg | EC.10.001
- V-belt L=2600mm | FS.10.001
- S.S. pinion drive shaft | FS.40.001
- S.S. hex shaft | FS.40.002
- Synth. support roller RH | HL.10.001
- Synth. support roller LH | HL.10.002
- Sprocket 3/8" Z=14 | KW.06B1-14
- Sprocket 3/8" Z=24 | KW.06B1-24
- Sprocket Z=10 | HLS.20.001
- Journal | HLS.20.002
- Bearing sleeve | HLS.20.006
- Special bolt | HLS.20.007
- Adjustable gear wheel | HLS.20.501
- Special sprocket | IGR.20.001
- Duplex sprocket | IGR.20.002
- Bushing | IGR.20.005
- Retaining ring | IGR.20.011
- Sleeve | IGR.20.012
- Shaft | IGR.20.013
- Bushing L=30 | LB.KU.001
- Bushing L=60 | LB.KU.002
- Bushing L=30 | LB.KU.003
- Bushing L=25 | LB.KU.004
- Bushing L=20 | LB.KU.005
- Bushing L=50 | LB.KU.006
- Bushing L=50 | LB.KU.007
- Bushing L=40 | LB.KU.008
- Bushing L=20 | LB.KU.009
- Bushing L=40 | LB.KU.011
- Bushing L=40 D=30 | LB.KU.012
- Collar bearing bushing 26x20x20 | LB.KK.001
- Air diffuser 3/4" | BR.20.002
- Reducer for hose 1” – 1¼” | BR.10.004
- Temperature feeler PT100 | BR.10.009
- Pneumatic steam valve | BR.10.014
- Magnetic Valve 1 1/4" | BR.10.021
- Temperature controller Dtron D304 | BR.10.010
- Synth. disc 78x6,4mm | BR.20.001
- Cutoff valve | BR.40.001
- Temperature feeler TC-2 incl. 35 mtr cable | BR.40.004
- Propeller shaft | BR.40.010
- Scalder protection ring | BR.40.013
- Motor control valve 3-way 1½" | BR.20.005
- Motor controlvalve 3-way 1" | BR.20.006
- Motor control valve 3-way 1 1/4" | BR.20.007
- Temperature feeler PT100 (S.S. version) | BR.20.008
- S.S. flexible hose 1,5 L=700mm | BR.10.002
- Ring | CL.20.001
- Diaphragm 10mm 61 shore | TD.10.004
- Diaphragm 12mm 61 shore | TD.10.006
- Diaphragm 14mm 55 shore | TD.10.008
- Diaphragm 15mm 55 shore | TD.10.009
- Diaphragm 12mm 75 shore | TD.10.011
- Diaphragm TTD 28mm | TD.10.016
- Diaphragm 12mm 70 shore | TD.10.018
- Shaft | KL.20.007
- Hollow shaft | KL.40.001
- Flange D=118 | KL.40.008
- Polycord 5mm endless Lo=1925mm | EC.10.011
- Valve | GP.40.003
- Gear wheel Z=13 | KLT.10.001
- Starwheel D=39mm | HP.10.001
- Special bush | WT.20.001
- Synth. gear wheel | WT.20.003
- Gear wheel | WT.20.004
- Gear wheel | WT.20.005
- Support | WT.20.006
- Flange | WT.20.021
- Pressure spring | VE.DR.104
- Torsion spring LH VM614 | VE.TO.007
- Torsion spring RH VM615 | VE.TO.008
- Torsion spring VM617 | VE.TO.027
- Torsion spring VM618 | VE.TO.028
- Draw spring S.S. Z-158 | VE.TR.019
- Overhead conveyor
- Brochures
- Company profile
- Contact